RTV167-85ML MG Chemicals, RTV167-85ML Datasheet - Page 3

• Manufacturer Part Number: RTV167-85ML
• Description: ADHESIVE SEALANT SIL HI STRENGTH
• Manufacturer: MG Chemicals
• Series: RTVr
• Type: Potting Compound, 1 Partr

Specifications of RTV167-85ML

• Features: High Strength
• Product: Silicones
• Size: 2.8 oz
• Application: Excellent in areas that require an extra strength sealing and bonding
• Chemical Component: Silicone
• Color: Grey
• Dielectric Strength: 19.7 KV⁄mm
• Dispensing Method: Tube
• Elongation: 600%
• Hardness: 37 (Shore A)
• Primary Type: Adhesive
• Special Features: High Tensile Strength
• Specific Gravity: 1.12
• Standards: UL Recognized
• Temperature Range: -60 to +205 °C
• Temperature, Rating: -60 to +205 °C
• Tensile Strength: 5.49 MPa
• Thermal Conductivity: 0.21 W⁄m.°K
• Time, Cure: 2 Days
• Time, Setting: 4 hrs.
• Viscosity: 180 g⁄Minute
• Volume Resistivity: 3 x 10^15 Ohm.cm
• Weight: 2.8 Oz.
• Main Industry: Electronics
• For Use With/related Products: Non Corrosive
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

5. FIRE-FIGHTING MEASURES
FLASH POINT:
IGNITION TEMPERATURE:
FLAMMABLE LIMITS IN AIR - LOWER (%):
FLAMMABLE LIMITS IN AIR - UPPER (%):
SENSITIVITY TO MECHANICAL IMPACT:
SENSITIVITY TO STATIC DISCHARGE
EXTINGUISHING MEDIA
SPECIAL FIRE FIGHTING PROCEDURES
6. ACCIDENTAL RELEASE MEASURES
ACTION TO BE TAKEN IF MATERIAL IS RELEASED OR SPILLED
7. HANDLING AND STORAGE
PRECAUTIONS TO BE TAKEN IN HANDLING AND STORAGE
STORAGE
8. EXPOSURE CONTROLS / PERSONAL PROTECTION
ENGINEERING CONTROLS
RTV167 3TG-Tube (0.198LBS-0.090KG)
POLYDIMETHYLSILOXANE SEALANT
Sensitivity to static discharge is not expected.
All standard extinguishing agents are suitable.
Firefighters must wear NIOSH/MSHA approved positive pressureself-contained breathing
apparatus with full face mask and fullprotective clothing.
Wipe, scrape or soak up in an inert material and put in a container for disposal. Wear proper protective
equipment as specified in the protective equipment section. Increase area ventilation.
Keep container closed when not in use. Avoid contact with skin and eyes. Remove contact lenses
before using sealant. Do not handle lenses until all sealant has been cleaned from the fingertips, nails
and cuticles. Residual sealant may remain on fingers for several days and transfer to lenses and
cause severe eye irritation. Product releases methanol during application and curing. Keep away from
children.
Store away from heat, sources of ignition, and incompatibles. Keep container tightly closed.
Eyewash stations; Showers; Ventilation and other forms of engineering controls are preferred for
Page 3/8
Not applicable
Not applicable
No data available
No data available
No
Material Safety Data Sheet
Version: 1.2
08/28/2007