RTV167-85ML MG Chemicals, RTV167-85ML Datasheet - Page 6

ADHESIVE SEALANT SIL HI STRENGTH

RTV167-85ML

Manufacturer Part Number
RTV167-85ML
Description
ADHESIVE SEALANT SIL HI STRENGTH
Manufacturer
MG Chemicals
Series
RTVr
Type
Potting Compound, 1 Partr
Datasheets

Specifications of RTV167-85ML

Features
High Strength
Product
Silicones
Size
2.8 oz
Application
Excellent in areas that require an extra strength sealing and bonding
Chemical Component
Silicone
Color
Grey
Dielectric Strength
19.7 KV⁄mm
Dispensing Method
Tube
Elongation
600%
Hardness
37 (Shore A)
Primary Type
Adhesive
Special Features
High Tensile Strength
Specific Gravity
1.12
Standards
UL Recognized
Temperature Range
-60 to +205 °C
Temperature, Rating
-60 to +205 °C
Tensile Strength
5.49 MPa
Thermal Conductivity
0.21 W⁄m.°K
Time, Cure
2 Days
Time, Setting
4 hrs.
Viscosity
180 g⁄Minute
Volume Resistivity
3 x 10^15 Ohm.cm
Weight
2.8 Oz.
Main Industry
Electronics
For Use With/related Products
Non Corrosive
Lead Free Status / RoHS Status
Lead free / RoHS Compliant
SENSITIZATION
SKIN IRRITATION
EYE IRRITATION
MUTAGENICITY
OTHER EFFECTS OF OVEREXPOSURE
12. ECOLOGICAL INFORMATION
ECOTOXICITY
DISTRIBUTION
CHEMICAL FATE
RTV167 3TG-Tube (0.198LBS-0.090KG)
POLYDIMETHYLSILOXANE SEALANT
D4 (whole body inhalation, 70 days prior to mating, through mating, gestation and lactation) resulted in
a statistically significant decrease in live mean litter size as well as extended periods of off-spring
delivery (dystocia). These results were not observed at the 70 and 300 ppm dosing levels. Preliminary
results from an ongoing 24-month combined chronic/oncogenicity study in rats exposed to 10, 30, 150,
or 700 ppm D4 showed test-article related effects in the kidney (male and female) and uterus of rats
exposed for 12 to 24 months. These effects include increased kidney weight and severity of chronic
nephropathy, increased uterine weight, increased incidence of endometrial cell hyperplasia, and an
increased incidence of endometrial adenomas. All of these effects are limited to the 700 ppm
exposure group. The relevance of these data to humans is unclear. Further studies are ongoing. In
developmental toxicity studies, rats and rabbits were exposed to octamethylcyclotetrasiloxane at
concentrations up to 700 ppm and 500 ppm respectively. No teratogenic effects (birth defects) were
observed in either study.
No data available
No data available
Unknown
This product contains methylpolysiloxanes which can generate formaldehyde at approximately 300
degrees Fahrenheit (150'C) and above, in atmospheres which contain oxygen. Formaldehyde is a
skin and respiratory sensitizer, eye and throat irritant, acute toxicant, and potential cancer hazard. A
MSDS for formaldehyde is available from Momentive., Methanol released during curing., Contains
octamethylcyclotetrasiloxane which may cause reproductive effects based on animal data.
No data available
No data available
No data available
No data available
Page 6/8
Material Safety Data Sheet
Version: 1.2
08/28/2007