F9469PC 3/8"X60YD 3M, F9469PC 3/8"X60YD Datasheet - Page 2

• Manufacturer Part Number: F9469PC 3/8"X60YD
• Description: TRANSFER TAPE 9469PC 3/8" X 60YD
• Manufacturer: 3M
• Series: VHB™r

Specifications of F9469PC 3/8"X60YD

• Tape Type: Adhesive Transfer Tape
• Adhesive: Acrylic, 100MP
• Backing, Carrier: Polycoated Kraft Liner
• Thickness: 0.0090" (9.0 mils, 0.229mm)
• Thickness - Adhesive: 0.0050" (5.0 mils, 0.127mm)
• Thickness - Backing, Carrier, Liner: 0.0040" (4.0 mils, 0.102mm)
• Width: 0.38" (9.65mm) 3/8"
• Length: 180' (55.0m) 60 yds
• Color: Clear
• Usage: Attachment, High Temperature Applications
• Temperature Range: 300°F (149°C)
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Other names: 00-021200-42910-1; 3M9039; 70-0062-7763-9

3M
F9460PC • F9469PC • F9473PC
Performance
Characteristics
Dynamic Mechanical
Properties
™
VHB
™
Adhesive Transfer Tapes with Adhesive 100MP
Note: The following technical information and data should be considered representative or
These VHB adhesive transfer tapes are made from the same adhesive system and are
thermoplastic in nature, becoming softer as temperature increases and firmer as
temperature decreases. As the adhesive becomes firmer, the adhesion performance
generally increases. At low temperatures (lower than -40°F [-40°C]), the VHB adhesive
transfer tapes become very firm and glassy; the ability to absorb impact energy is
reduced. In contrast, adhesion strength reduces with increasing temperatures. Typical
adhesive strength properties at room temperatures are shown below.
Products
Peel Adhesion to
Stainless Steel
(ASTM D3330)
Normal Tensile to
Aluminum (T-Block)
(ASTM D-897)
Static Shear or
Shear Holding Power
to Stainless Steel
(ASTM D-3654)
Dynamic Shear to
Stainless Steel
(ASTM D-1002)
Temperature Tolerance
(Short Term)
Temperature Tolerance
(Long Term)
Solvent Resistance
(3 splash testing cycles:
20 seconds submersion,
& 20 seconds air dry.)
UV Resistance
Note: The following technical information and data should be considered representative or
For engineers who have to use adhesive properties for modeling and analysis purpose, we
suggest a Young’s modulus of 4.5 x 10
ratio of 0.499. For detailed adhesive modulus and damping properties, please refer to the
nomograph for 3M™ VHB™ Adhesive Transfer Tapes, which is available upon request
through our technical service group. The nomograph presents adhesive modulus and
damping properties as functions of temperature and frequency.
typical only, and should not be used for specification purposes.
typical only, and should not be used for specification purposes.
Will hold 1000 grams of loading with a time period of more than
10,000 minutes at temperatures up to 300°F (149°C).
500°F (260°C): 4-hour conditioning at the indicated temperature with
100 g static load.
300°F (149°C): Maximum temperature where tape supports 250 g in
static shear for 10,000 minutes.
No apparent degradation when exposed to splash testing of many
common solvents and fluids including gasoline, JP-4 fuel, mineral
Excellent UV resistance through outdoor weathering tests and
weather-O-meter tests.
spirits, motor oil, ammonia cleaner, acetone and methyl ethyl ketone.
(120 N/10 cm)
100 lb./in.
(690 kPA)
(550 kPa)
F9460PC
- 2 -
7.0 lb./in.
80 lb./in.
2
2
3M™ VHB™ Adhesive Transfer Tapes
2
kPA (measured at 23°C & 1 Hz) and a Poisson’s
(140 N/10 cm)
100 lb./in.
(690 kPA)
F9469PC
(550 kPa)
8.0 lb./in.
80 lb./in.
2
2
(160 N/10 cm)
100 lb./in.
(690 kPA)
(550 kPa)
F9473PC
9.0 lb./in.
80 lb./in.
2
2