RAISLETAPE54 3M, RAISLETAPE54 Datasheet - Page 23

• Manufacturer Part Number: RAISLETAPE54
• Description: TAPE ROHS AISLE MARKING 54' ROLL
• Manufacturer: 3M

Specifications of RAISLETAPE54

• Tape Type: Marking - Printed "Lead-Free Area"
• Backing, Carrier: PVC (Poly Vinyl Chloride)
• Thickness: 0.0060" (6.0 mils, 0.152mm)
• Width: 3.00" (76.20mm) 1/4'
• Length: 54' (16.5m) 18 yds
• Color: White, Green Print
• Usage: Aisle Marking
• Lead Free Status / RoHS Status: Not applicable / Not applicable
• Temperature Range: -
• Adhesive: -
• Thickness - Adhesive: -
• Thickness - Backing, Carrier, Liner: -
• Other names: 51111764688; 80000954547

Shelf Life
12 Months is the maximum amount of time an end-user
has to use the product while stored within the conditions
recommended by 3M.
3M
Lower application temp for many
substrates including heat sensitive
• Electrically-heated pneumatic green
• Four adhesives with a range of
• Optional pre-heater to keep cartridges
3M
Note: The technical information and data should be considered representative only and should not be used for specification purposes.
Product
17005
17010
17030
17060
applicator dispenses adhesive at
170°F (77°C) with the squeeze of
a trigger
– Adhesive can stay in applicator at
properties including adhesion to heat
sensitive substrates
ready to use
™
dispensing temperature for up to
40 hours
Scotch-Weld
™
Description
• Very fast set time • Excellent wood bonding adhesive
• Medium open time
• Fast set time • Best for bonding wood and plastics
• Small-to-medium parts assembly
• Medium set time • Low viscosity • Best for bonding
• Long open time • Lower viscosity • Thin glue line
Scotch-Weld
wood to select plastics • Thin glue line
™
Polyurethane Reactive (PUR) Easy Adhesives
™
Polyurethane Reactive (PUR) Easy Adhesive Systems
63
Permanently and quickly bond wood and MDF
(Medium Density Fiberboard) bottoms and side
panels in drawers.
Open Time
This is the maximum time between the application of the
adhesive and when the parts must be joined together.
This information is based on 1/8” bead and non-metallic
substrates at 75°F (20°C).
Bond wood or plastic
rosettes to wood drawers
without fixturing or
drying time.
Viscosity @
170°F (77°C)
(cps)
28,600
14,200
15,700
9600
Open
Time
(Min.)
0.75
0.75
2.5
1
Set
Time
(Sec.)
10
30
60
65
5
Adhesives are available for bonding a variety of
wood sizes and configurations such as this
mortise and tenon assembly.
Set Time
Also known as fixturing/clamping time. This is the
minimum amount of time required for the adhesive to
solidify and hold the parts together (able to support a
tensile load of 5 psi).
Shore
D
65
35
60
30
Tensile
Strength
(PSI)
3900
1055
4000
1625
Elongation
(%)
725
750
625
400
64
66
23