RAISLETAPE54 3M, RAISLETAPE54 Datasheet - Page 36

• Manufacturer Part Number: RAISLETAPE54
• Description: TAPE ROHS AISLE MARKING 54' ROLL
• Manufacturer: 3M

Specifications of RAISLETAPE54

• Tape Type: Marking - Printed "Lead-Free Area"
• Backing, Carrier: PVC (Poly Vinyl Chloride)
• Thickness: 0.0060" (6.0 mils, 0.152mm)
• Width: 3.00" (76.20mm) 1/4'
• Length: 54' (16.5m) 18 yds
• Color: White, Green Print
• Usage: Aisle Marking
• Lead Free Status / RoHS Status: Not applicable / Not applicable
• Temperature Range: -
• Adhesive: -
• Thickness - Adhesive: -
• Thickness - Backing, Carrier, Liner: -
• Other names: 51111764688; 80000954547

36
Solventless fast track for
immediate bonding of foam and
other lightweight materials
3M
is a fast, neat alternative to solvent-based
systems for bonding most foams, fabrics,
plastics, particle board, and light-gauge metals.
Applications range from furniture cushions
to cushioning inserts, modular office panels
to gym floor pads, and more. You simply
spray a neat track of 100% solids adhesive
right where you want it. Apply to one or
both surfaces and bond substrates immediately.
Other features include:
• Up to 10-minute open time for handling
• One-part to eliminate the fuss of mixed
• Designed for hand-held or bulk applicators.
3M
3M
Note: The technical information and data on these pages should be considered representative or typical only and should not be used for specification purposes.
3M
(1) Bonds were made by spraying adhesive onto 3/4 in.
thick, 2 lb. density polyester urethane foam. Open
time will vary depending on substrate.
convenience and bonding larger areas.
systems.
™
™
Scotch-Weld
Typical Coverage
2-Surface Application
1-Surface Application
Adhesives Characteristics and Suggested Coverage
Description
Color
Open Time
Open Time
Heat Resistance
Peel Adhesion (PIW)
™
™
Scotch-Weld
Fir
ABS
Polypropylene
PVC
Cold Rolled Steel
High Density Polyethylene
Non-Structural Adhesives
Scotch-Weld
(1)
(1)
One surface (Foam/PVC)
Two surface (Foam/Foam)
™
Hot Melt Spray Adhesive
(2)
(3)
™
Hot Melt Spray Adhesives
™
Hot Melt Spray Adhesives
(2) Tested per 3M IATD test method C-3093 using 2 lb.
In display cases for jewelry and other retail
items, foam is bonded to foam and fabric. Low
temperature spray will not damage heat-sensitive
substrates.
dead load.
6111/6111 Green
Standard product
Tan/Green
1 minute
6 minutes
145°F (63°C)
34.4
12.1
46.3
9.9
16.5
8.2
1-2 grams per square foot
3-5 grams per square foot
Smooth Surface
6111 HT/6111 HT Blue
Higher heat resistance
Tan/Blue
3 minutes
8 minutes
175°F (79°C)
25.6
16.5
14.4
16.3
29.9
2.3
120
(3) According to 3M IATD test method C-3012. 180°
peel strength was determined at a cross head
speed of 2 inches/minute at 73°F (23°C).
In carrying case assembly, 3M
Hot Melt Spray Adhesive bonds foam to foam,
plywood, metal or plastic.
2-3 grams per square foot
5-7 grams per square foot
Textured Surface
6116
160°F (71°C)
21.4
20.3
16.4
N/A
20.4
White
2 minutes
6 minutes
N/A
Low viscosity
™
Scotch-Weld
119
™
121