MT5600BA-V92-EU Multi-Tech Systems, MT5600BA-V92-EU Datasheet - Page 23
![no-image](/images/no-image-200.jpg)
MT5600BA-V92-EU
Manufacturer Part Number
MT5600BA-V92-EU
Description
MODEM V.92 DATA/FAX WORLD
Manufacturer
Multi-Tech Systems
Series
MultiModem® IIr
Datasheets
1.SF100-G.pdf
(4 pages)
2.MT5656ZDX-EU.pdf
(55 pages)
3.MT5600BA-V92-NPS.pdf
(2 pages)
4.MT5600BA-V92-NPS.pdf
(8 pages)
5.MT5600BA-V92-NPS.pdf
(58 pages)
Specifications of MT5600BA-V92-EU
Data Format
V.92
Interface
RS-232
Voltage - Supply
9 V ~ 12 V
Mounting Type
Desktop
Package / Case
9.0" L x 6.2" W x 1.4" H (229mm x 158mm x 36mm)
Lead Free Status / RoHS Status
Lead free / RoHS Compliant
Other names
881-1058
DTE Commands
Command:
Description:
Values:
Report Commands:
Command: +ILRR
Description:
Values:
Report Commands:
Reported Rate:
Multi-Tech Systems, Inc. AT Commands Reference Guide (S000273G)
+IFC DTE-Modem Local Flow Control
This extended-format compound parameter controls the operation of local flow control
between the DTE and the modem during the data state when V.42 error control is used or
when fallback to non-error control mode is specified to include buffering and flow control. It
accepts two numeric subparameters.
Syntax: +IFC=[<modem_by_DTE>[,<DTE_by_modem>]]
<modem_by_DTE> Specifies method DTE will use to control flow of received data from
<DTE_by_modem> Specifies method modem will use to control flow of transmitted data
+IFC?
+IFC=? Reports supported range of parameter values.
DTE-Modem Local Rate Reporting
This extended-format numeric parameter controls whether or not the +ILRR:<rate>
information text is transmitted from the modem to the DTE.
Syntax: +ILRR=<value>
<value>
+ILRR?
+ILRR=? Reports supported range of parameter values.
The <rate> reported is the current (negotiated or renegotiated) DTE-modem rate. If
enabled, intermediate result code is transmitted after any modulation, error control or data
compression reports are transmitted and before any final result code is transmitted. The
<rate> is applied after the final result code is transmitted. The DTE-modem port rate
changes only if neither buffered mode nor error controlled means are enabled (+ES=x,0)
and if the negotiated carrier rate (+MRR) does not match the current DTE-modem port
rate (auto detected from previous command line).
Syntax: +ILRR: <rate>[,<rx_rate>].
Reported Rate Values:
<rate>
<rx_rate>
Reports current or selected values.
Decimal number corresponding to the selected option.
0
1
Reports current or selected values.
Disables reporting of local port rate (+ILRR: is not transmitted). Default
Enables reporting of local port rate (+ILRR: is transmitted).
Decimal value representing the current (negotiated or renegotiated)
DTE-modem rate: 0, 300, 1200, 2400, 4800, 9600, 19200, 38400,
57600, 115200, 230400
Optional decimal value reporting the RXD rate, if it is different from the
TXD rate: 0,300, 1200, 2400, 4800, 9600, 19200, 38400, 57600,
115200, or 230400
the modem.
0None.
1
2
3
from the DTE.
0
1
2
XON/XOFF on transmitted data; do not pass XON/XOFF
characters to remote modem.
Circuit 133 (RR). Default
DC1/DC3 on circuit 103 (TD) with DC1/DC3 characters
being passed through to the remote DCE in addition to being
acted upon for local flow control.
None.
XON/XOFF on received data.
CTS/RTS. Default
Chapter 2 – AT Commands
23