KSZ8873MLLI Micrel Inc, KSZ8873MLLI Datasheet - Page 26

• Manufacturer Part Number: KSZ8873MLLI
• Description: IC ETHERNET SWITCH 3PORT 64LQFP
• Manufacturer: Micrel Inc

Specifications of KSZ8873MLLI

• Controller Type: Ethernet Switch Controller
• Interface: MII
• Voltage - Supply: 1.8V, 2.5V, 3.3V
• Operating Temperature: -40°C ~ 85°C
• Mounting Type: *
• Package / Case: *
• Number Of Primary Switch Ports: 3
• Internal Memory Buffer Size: 32
• Fiber Support: No
• Integrated Led Drivers: Yes
• Phy/transceiver Interface: MII
• Power Supply Type: Analog
• Data Rate (typ): 10/100Mbps
• Vlan Support: Yes
• Operating Temperature (max): 85C
• Operating Temperature (min): -40C
• Mounting: Surface Mount
• Jtag Support: No
• Operating Supply Voltage (max): 1.89/3.465V
• Operating Temperature Classification: Industrial
• Data Rate: 100Mbps
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Current - Supply: -
• Lead Free Status / RoHS Status: Compliant, Lead free / RoHS Compliant

Micrel, Inc.
The KSZ8873MLL/FLL/RLL will not forward the following packets:
1. Error packets
2. IEEE802.3x PAUSE frames
3. "Local" packets
September 2009
These include framing errors, Frame Check Sequence (FCS) errors, alignment errors, and illegal size
packet errors.
KSZ8873MLL/FLL/RLL intercepts these packets and performs full duplex flow control accordingly.
Based on destination address (DA) lookup. If the destination port from the lookup table matches the port
from which the packet originated, the packet is defined as "local."
Figure 5. Destination Address Resolution Flow Chart, Stage 2
Spanning Tree
IGMP Process
Membership
Port Mirror
Port VLAN
Process
Process
Check
PTF1
PTF2
- Check receiving port's receive enable bit
- Check destination port's transmit enable bit
- Check whether packets are special (BPDU
- Applied to MAC #1 and MAC #2
- MAC #3 is reserved for
- IGMP will be forwarded to port 3
- RX Mirror
- TX Mirror
- RX or TX Mirror
- RX and TX Mirror
or specified)
microprocessor
26
KSZ8873MLL/FLL/RLL
M9999-092309-1.2