UM245R FTDI, UM245R Datasheet - Page 5

• Manufacturer Part Number: UM245R
• Description: Interface Modules & Development Tools USB to Parallel FIFO Dev Mod for FT245R
• Manufacturer: FTDI
• Type: Development Moduler

Specifications of UM245R

• Interface Type: USB, Parallel FIFO
• Data Bus Width: 8 bit
• Operating Supply Voltage: 1.8 V to 5.25 V
• Product: Interface Modules
• Supported Devices: FT245R
• Svhc: No SVHC (18-Jun-2010)
• Development Tool Type: Development Kit
• Kit Features: Single Chip USB To Parallel FIFO Bidirectional Data Transfer Interface
• Rohs Compliant: Yes
• Mcu Supported Families: FT245RL
• Supported Families: FT245RL
• Tool / Board Applications: USB To Parallel FIFO Interface
• For Use With/related Products: FT245R
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

2.2 Features
The UM245R USB Parallel FIFO has the following features:
© Copyright 2009 Future Technology Devices International Ltd
Single chip USB to parallel FIFO bidirectional
data transfer interface.
Entire USB protocol handled on the chip –
No USB-specific firmware programming
required.
Simple interface to MCU / PLD / FPGA logic
with 4-wire handshake interface.
Data transfer rate to 1 Megabyte / second -
D2XX Direct Drivers.
Data transfer rate to 300 kilobyte / second –
VCP Drivers.
FTDI‟s royalty-free VCP and D2XX drivers
eliminate the requirement for USB driver
development in most cases.
USB FTDIChip-ID™ feature.
FIFO receive and transmit buffers for high
data throughput.
Adjustable receive buffer timeout.
Synchronous and asynchronous bit bang
mode interface options with RD# and WR
strobes allow the data bus to be used as a
general purpose I/O port.
Integrated 1024 bit internal EEPROM for
storing USB VID, PID, serial number and
product description strings.
Device supplied pre-programmed with
unique USB serial number.
Support for USB suspend / resume through
PWREN# pin and Wake Up pin function.
In-built support for event characters.
Support for bus powered, self powered, and
high-power bus powered USB
configurations.
UM245R USB - Parallel FIFO Development Module Datasheet Version 1.04
True 5V / 3.3V / 2.8V / 1.8V CMOS drive
Fully integrated AVCC supply filtering - No
USB bulk transfer mode.
-40°C to +85°C extended operating
I/O.
Integrated level converter on FIFO interface
and control pins for interfacing to 5V - 1.8V
Logic.
output and TTL input.
High output drive option on I/O pins.
Integrated USB termination resistors.
Integrated power-on-reset circuit.
Fully integrated clock - no external crystal,
oscillator, or resonator required.
separate AVCC pin and no external R-C filter
required.
compatible
temperature range.
Supplied in PCB designed to fit a standard
15.0mm (0.6”) wide 24 pin DIP socket. Pins
are on a 2.54mm (0.1”) pitch.
On board USB „B‟ socket allows module to be
connected to a PC via a standard A to B USB
cable.
Integrated 3.3V level converter for USB
3.3V to 5.25V Single Supply Operation.
Low operating and USB suspend current.
Low USB bandwidth consumption.
UHCI / OHCI / EHCI host controller
USB 2.0 Full Speed compatible.
Document Reference No.: FT_000202
Clearance No.: FTDI# 124
4