LPC1766-STK Olimex Ltd., LPC1766-STK Datasheet - Page 11

• Manufacturer Part Number: LPC1766-STK
• Description: MCU, MPU & DSP Development Tools DEV BRD FOR LPC1766 256KB FLASH 64KB RAM
• Manufacturer: Olimex Ltd.

Specifications of LPC1766-STK

• Processor To Be Evaluated: LPC1766
• Data Bus Width: 32 bit
• Interface Type: RS-232, Ethernet, USB, CAN, I2C, SPI, UART
• Dimensions: 134.6 mm x 101.6 mm
• Operating Supply Voltage: 3.3 V
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

5VA_E
Default state is closed.
AGND_E
Default state is closed.
EXT_TEMP/TH1
Default state is in position TH1.
DBG_E
RST_E
ISP_E
ACC_IRQ/LED2
Default state is LED2.
USB_D-
Default state is open.
Default state is closed.
Default state is open.
sensor and when is in position TH1 – takes signal from the thermistor TH1 of the board.
enables USB HOST and when 5-6 are shorted – enables USB OTG.
Default state is 1-2.
accelerometer and when is in position LED2 – enables LED2.
This jumper, when closed, supplies analog 5V voltage supply to the audio amplifiers.
This jumper, when closed, connects analog GND to the GND of the MCU.
This jumper, when is in position EXT_TEMP – takes signal from external temperature
The position of this jumper doesn’t matter.
This jumper, when closed, enables programing via RS232.
This jumper, when closed, enables programing via RS232.
This jumper when is in position ACC_IRQ – enables interrupt request from the
This jumper, when1-2 are shorted – enables USB DEVICE, when 3-4 are shorted–
Page 11