LPC1766-STK Olimex Ltd., LPC1766-STK Datasheet - Page 5

• Manufacturer Part Number: LPC1766-STK
• Description: MCU, MPU & DSP Development Tools DEV BRD FOR LPC1766 256KB FLASH 64KB RAM
• Manufacturer: Olimex Ltd.

Specifications of LPC1766-STK

• Processor To Be Evaluated: LPC1766
• Data Bus Width: 32 bit
• Interface Type: RS-232, Ethernet, USB, CAN, I2C, SPI, UART
• Dimensions: 134.6 mm x 101.6 mm
• Operating Supply Voltage: 3.3 V
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

Standard JTAG test/debug interface for compatibility with existing tools.
Serial Wire Debug and Serial Wire Trace Port options.
Emulation trace module enables non-intrusive, high-speed real-time tracing of
instruction execution.
Integrated PMU (Power Management Unit) automatically adjusts internal
regulators to minimize power consumption during Sleep, Deep sleep, Power-
down, and Deep power-down modes.
Four reduced power modes: Sleep, Deep-sleep, Power-down, and Deep power-
down.
Single 3.3 V power supply (2.4 V to 3.6 V).
Four external interrupt inputs configurable as edge/level sensitive. All pins on
PORT0 and PORT2 can be used as edge sensitive interrupt sources.
Non-maskable Interrupt (NMI) input.
Clock output function that can reflect the main oscillator clock, IRC clock, RTC
clock, CPU clock, and the USB clock.
The Wakeup Interrupt Controller (WIC) allows the CPU to automatically wake
up from any priority interrupt that can occur while the clocks are stopped in
deep sleep, Power-down, and Deep power-down modes.
Processor wake-up from Power-down mode via interrupts from various
peripherals.
Brownout detect with separate threshold for interrupt and forced reset.
Power-On Reset (POR).
Crystal oscillator with an operating range of 1 MHz to 25 MHz.
4 MHz internal RC oscillator trimmed to 1 % accuracy that can optionally be
used as a system clock.
PLL allows CPU operation up to the maximum CPU rate without the need for
a high-frequency crystal. May be run from the main oscillator, the internal RC
oscillator, or the RTC oscillator.
USB PLL for added flexibility.
Code Read Protection (CRP) with different security levels.
Repetitive interrupt timer provides programmable and repeating
timed interrupts.
Each peripheral has its own clock divider for further power savings.
Page 5