LPC-E2468 Olimex Ltd., LPC-E2468 Datasheet - Page 3

• Manufacturer Part Number: LPC-E2468
• Description: MCU, MPU & DSP Development Tools DEV BRD FOR LPC2468 128MBFLASH 16MBSDRAM
• Manufacturer: Olimex Ltd.

Specifications of LPC-E2468

• Processor To Be Evaluated: LPC2468
• Interface Type: Ethernet, USB, I2C, JTAG, SPI, UART
• Dimensions: 90 mm x 60 mm
• Operating Supply Voltage: 3.3 V
• Silicon Manufacturer: NXP
• Core Architecture: ARM
• Core Sub-architecture: ARM7TDMI
• Silicon Core Number: LPC2xxx
• Silicon Family Name: LPC24xx
• Kit Contents: Board
• Rohs Compliant: Yes
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Other names: 1776321 52R3625

BOARD USE REQUIREMENTS:
PROCESSOR FEATURES:
Hardware:
The LPC2468 processor has the following features:
Cables:
Software: The board is delivered with uC Linux pre-loaded. You could
●
●
●
●
●
●
●
●
●
ARM7TDMI-S processor, running at up to 72 MHz.
512 kB on-chip flash program memory with In-System Programming
(ISP) and In-Application Programming (IAP) capabilities. Flash
program memory is on the ARM local bus for high performance CPU
access.
98 kB on-chip SRAM includes:
Dual
simultaneous Ethernet DMA, USB DMA, and program execution
from on-chip flash with no contention.
EMC provides support for asynchronous static memory devices such
as RAM, ROM and flash, as well as dynamic memories such as
Single Data Rate SDRAM.
Advanced Vectored Interrupt Controller (VIC), supporting up to 32
vectored interrupts.
General Purpose AHB DMA controller (GPDMA) that can be used
with the SSP,
I
transfers.
Serial Interfaces:
2
S-bus, and SD/MMC interface as well as for memory-to-memory
▬
▬
▬
▬
▬
▬
USB A-B cable to connect to virtual serial port on the board.
You will need LPT cable if you want to program the MCU with
AVR-JTAG. You might need other cables in case of other
programmers/debuggers.
develop projects for the board with Eclipse, IAR, etc. Please,
refer to the LPC-E2468 Quickstart Guide which is on the CD
for more details on the software requirements.
64 kB of SRAM on the ARM local bus for high performance CPU
access.
16 kB SRAM for Ethernet interface. Can also be used as
general purpose SRAM.
16 kB SRAM for general purpose DMA use also accessible by
the USB.
2 kB SRAM data storage powered from the Real-Time Clock
(RTC) power domain.
Ethernet MAC with MII/RMII interface and associated DMA
controller. These functions reside on an independent AHB bus.
USB 2.0 full-speed dual port Device/Host/OTG Controller with
on-chip PHY and associated DMA controller.
Advanced
Programmer/debugger AVR-JTAG or any compatible tool.
High-performance
Bus
(AHB)
system
allows