BLM21BD601SH1D Murata, BLM21BD601SH1D Datasheet - Page 63

• Manufacturer Part Number: BLM21BD601SH1D
• Description: EMI/RFI Suppressors & Ferrites 0805 600ohms HiSpeed Signal Line Tape
• Manufacturer: Murata
• Series: BLM Br

Specifications of BLM21BD601SH1D

• Shielding: Unshielded
• Test Frequency: 100 MHz
• Product: Chip Ferrite Beads
• Impedance: 600 Ohms
• Tolerance: 25 %
• Maximum Dc Current: 200 mAmps
• Maximum Dc Resistance: 0.35 Ohms
• Operating Temperature Range: - 55 C to + 125 C
• Package / Case: 0805 (2012 metric)
• Termination Style: SMD/SMT
• Dc Resistance Max: 0.35ohm
• Dc Current Rating: 200mA
• Ferrite Mounting: SMD
• Ferrite Case Style: 0805 / 2012
• Operating Temperature Max: +125°C
• Operating Temperature Min: -55°C
• Rohs Compliant: Yes
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

!Note
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
sales representatives or product engineers before ordering.
!Note
2. Mechanical Performance
3. Environmental Performance (It should be soldered on the substrate.)
2
No.
No.
Specifications and Test Methods
1
2
3
4
5
6
7
8
1
2
3
Continued from the preceding page.
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Appearance and
Dimensions
Marking
Reflow Solderability
Resistance to
Soldering Heat
Bending Strength
Drop
Vibration
Shock
Biased Humidity
Heat Life
Heat Shock
Item
Item
Meet dimensions.
Marking can be read easily.
Appropriate solder fillet is formed.
Meet Table 1.
Table 1
Meet Table 2.
Table 2
Meet Table 3.
Table 3
Meet Table 4.
Table 4
Meet Table 4.
Insulation Resistance
Insulation Resistance
Insulation Resistance
Insulation Resistance
Capacitance Change
Capacitance Change
Capacitance Change
Capacitance Change
Dielectric Strength
Dielectric Strength
Appearance
Appearance
Appearance
Appearance
BNX024H/025H series Specifications and Test Methods
Specifications
Specifications
BNX024H01: 100M min.
BNX025H01: 50M min.
BNX024H01: 100M min.
BNX025H01: 50M min.
BNX024H01: 5M min.
BNX025H01: 2.5M min.
BNX024H01: 10M min.
BNX025H01: 5M min.
Within 12.5%
Within 12.5%
Within 7.5%
No damaged
No damaged
Within 15%
No damaged
No damaged
No failure
No failure
Visual Inspection and measured with micrometer caliper and
slid caliper.
It is inspected Visually.
Comfirm the solder mounting condition after mounting based
on standard solder mounting method.
Soldering Iron: 100W max.
Tip Temperature: 450 5 C
Soldering Time: 5s, 2 times
Do not touch the products directly with the tip of the soldering
iron.
It shall be soldered on the glass-epoxy substrate.
(100mm x 40mm x 1.6mm)
Deflection: 2mm
Keeping Time: 30s
Speed: 0.5mm/s
It shall be dropped on concrete or steel board.
Method: free fall
Height: 1m
The Number of Time: 10 times
It shall be soldered on the glass-epoxy substrate.
Oscillation Frequency: 10 to 2000 to 10Hz for 20 minutes
Total amplitude 3.0mm or Acceleration amplitude 196m/s
whichever is smaller.
Time: A period of 3 hours in each of 3 mutually perpendicular
directions. (Total 9 hours)
It shall be soldered on the glass-epoxy substrate.
Acceleration: 14700m/s
Normal duration: 0.5ms
Waveform: Half-sine wave
Direction: 6 direction
Testing Time: 3 times for each direction
Temperature: 85 2 C
Humidity: 80 to 85% (RH)
Voltage: Rated Voltage
Time: 1000
Then measure values after exposure in room condition for
48 4 hours.
Temperature: 125 2 C
Voltage: Rated Voltage x 2
Time: 1000
Then measure values after exposure in room condition for
48 4 hours.
1 Cycle:
Total Cycles: 1000 cycles
Then measure values after exposure in room condition for
48 4 hours.
1 step: -55
2 step: Room Temperature/within 0.5 min.
3 step: +125
4 step: Room Temperature/within 0.5 min.
48
48
0
0
0
3
hrs.
hrs.
3
0
C/30
C/30
45
3
0
min.
2
3
0
Test Methods
R230
Test Methods
min.
Pressure jig
45
F
Product
Deflection
(in mm)
2
C50E.pdf
61
08.8.28
4