PCF8563T/5,518 NXP Semiconductors, PCF8563T/5,518 Datasheet - Page 5

• Manufacturer Part Number: PCF8563T/5,518
• Description: IC RTC/CALENDAR 8SOIC
• Manufacturer: NXP Semiconductors
• Type: Clock/Calendarr

Specifications of PCF8563T/5,518

• Package / Case: *
• Time Format: HH:MM:SS (24 hr)
• Date Format: YY-MM-DD-dd
• Memory Size: 128b (16 x 8)
• Interface: I²C, 2-Wire Serial
• Voltage - Supply: 1.8 V ~ 5.5 V
• Operating Temperature: -40°C ~ 85°C
• Mounting Type: *
• Function: Clock, Calendar, Alarm, Timer
• Supply Voltage (max): 5.5 V
• Supply Voltage (min): 1 V
• Maximum Operating Temperature: + 85 C
• Minimum Operating Temperature: - 40 C
• Mounting Style: SMD/SMT
• Rtc Bus Interface: I2C
• Supply Current: +/- 50 mA
• Bus Type: Serial (2-Wire, I2C)
• Operating Supply Voltage (typ): 2.5/3.3/5V
• Package Type: SO
• Operating Supply Voltage (max): 5.5V
• Operating Supply Voltage (min): 1.8V
• Operating Temperature Classification: Industrial
• Operating Temperature (max): 85C
• Operating Temperature (min): -40C
• Pin Count: 8
• Mounting: Surface Mount
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant, Lead free / RoHS Compliant
• Other names: 568-6650-2; PCF8563T/5,518

NXP Semiconductors
8. Functional description
PCF8563
Product data sheet
7.2 Pin description
8.1 CLKOUT output
Table 3.
[1]
The PCF8563 contains sixteen 8-bit registers with an auto-incrementing register address,
an on-chip 32.768 kHz oscillator with one integrated capacitor, a frequency divider which
provides the source clock for the Real-Time Clock (RTC) and calender, a programmable
clock output, a timer, an alarm, a voltage-low detector, and a 400 kHz I
All 16 registers are designed as addressable 8-bit parallel registers although not all bits
are implemented. The first two registers (memory address 00h and 01h) are used as
control and/or status registers. The memory addresses 02h through 08h are used as
counters for the clock function (seconds up to years counters). Address locations 09h
through 0Ch contain alarm registers which define the conditions for an alarm.
Address 0Dh controls the CLKOUT output frequency. 0Eh and 0Fh are the Timer_control
and Timer registers, respectively.
The Seconds, Minutes, Hours, Days, Months, Years as well as the Minute_alarm,
Hour_alarm, and Day_alarm registers are all coded in Binary Coded Decimal (BCD)
format.
When one of the RTC registers is written or read, the contents of all time counters are
frozen. Therefore, faulty writing or reading of the clock and calendar during a carry
condition is prevented.
A programmable square wave is available at the CLKOUT pin. Operation is controlled by
the register CLKOUT_control at address 0Dh. Frequencies of 32.768 kHz (default),
1.024 kHz, 32 Hz, and 1 Hz can be generated for use as a system clock, microcontroller
clock, input to a charge pump, or for calibration of the oscillator. CLKOUT is an open-drain
output and enabled at power-on. If disabled it becomes high-impedance.
Symbol
OSCI
OSCO
INT
V
SDA
SCL
CLKOUT
V
n.c.
SS
DD
The die paddle (exposed pad) is wired to V
Pin description
All information provided in this document is subject to legal disclaimers.
1
2
-
Pin
DIP8, SO8, TSSOP8
3
4
5
6
7
8
Rev. 8 — 18 November 2010
HVSON10
1
2
4
5
6
7
8
9
3, 10
SS
[1]
but should not be electrically connected.
Description
oscillator input
oscillator output
interrupt output (open-drain; active LOW)
ground
serial data input and output
serial clock input
clock output, open-drain
supply voltage
not connected; do not connect and do not
use as feed through
Real-time clock/calendar
PCF8563
2
© NXP B.V. 2010. All rights reserved.
C-bus interface.
5 of 45