STW8Q2PA-S0-HA Seoul Semiconductor Inc, STW8Q2PA-S0-HA Datasheet - Page 20
![no-image](/images/manufacturer_photos/0/5/599/seoul_semiconductor_inc_sml.jpg)
STW8Q2PA-S0-HA
Manufacturer Part Number
STW8Q2PA-S0-HA
Description
LED WARM WHITE 2700K 100MA SMD
Manufacturer
Seoul Semiconductor Inc
Datasheet
1.STW8Q2PA-S5-CA.pdf
(21 pages)
Specifications of STW8Q2PA-S0-HA
Lumens @ Current - Max
44lm
Lumens/watt @ Current - Test
91lm/W
Color
White, Warm
Current - Test
100mA
Luminous Flux @ Current - Test
29lm
Current - Max
160mA
Voltage - Forward (vf) Typ
3.2V
Wavelength
2700K
Lens Style/size
Rectangle with Flat Top
Viewing Angle
120°
Mounting Type
Surface Mount
Package / Case
4-SMD, Flat Leads
Lead Free Status / RoHS Status
Lead free / RoHS Compliant
Other names
897-1075-2
STW8Q2PA-SO-HA
STW8Q2PA-SO-HA
(1) Storage
(2) Attention after open.
(3) In the case of more than 4 week passed after opening or change color of indicator
(4) Silver plating might be tarnished in the environment that contains corrosive gases
(5) Any mechanical force or any excess vibration shall not be accepted to apply during
(6) Quick cooling shall be avoided.
(7) Components shall not be mounted on warped direction of PCB.
(8) Anti radioactive ray design is not considered for the products.
(9) This device should not be used in any type of fluid such as water, oil, organic
(10) When the LEDs are illuminating, operating current should be decided after considering
(11) The LEDs must be soldered within seven days after opening the moisture-proof packing.
(12) Repack unused products with anti-moisture packing, fold to close any opening and then
(13) The appearance and specifications of the product may be modified for improvement
LED is correspond to SMT, when LED be soldered dip, interfacial separation may affect
the light transmission efficiency, causing the light intensity to drop.
Attention in followed; Keeping of a fraction
Temperature : 5 ~ 40ºC Humidity : less than 10%
Temperature : 5ºC ~30ºC Humidity : maximum 70%RH
In order to avoid the absorption of moisture, it is recommended to store in a dry box (or a
desicator) with a desiccant. Otherwise, to store them in the following environment is
recommended.
on desiccant, components shall be dried 10-12hr. at 60±5ºC.
and materials. Also any product that has tarnished lead might be decreased the
solder-ability and optical-electrical properties compare to normal ones.
Please do not expose the product in the corrosive environment during the storage.
cooling process to normal temperature after soldering.
solvent etc. When washing is required, IPA should be used.
the ambient maximum temperature.
store in a dry place.
without notice.
12. precaution for use
Document No. : SSC-QP-7-07-24
www.seoulsemicon.com
www.seoulsemicon.com
October 2010
October 2010
Rev. 05
Rev. 05