LIS3L02DQ STMicroelectronics, LIS3L02DQ Datasheet - Page 15

• Manufacturer Part Number: LIS3L02DQ
• Description: ACCELEROMETER TRPL AXIS 44QFN
• Manufacturer: STMicroelectronics

Specifications of LIS3L02DQ

• Axis: X, Y, Z
• Acceleration Range: ±2g
• Sensitivity: 1024 LSb/g
• Voltage - Supply: 2.7 V ~ 3.6 V
• Output Type: Digital
• Bandwidth: 1.5kHz
• Interface: I²C, SPI
• Mounting Type: Surface Mount
• Package / Case: 44-QFN
• Sensing Axis: X, Y, Z
• Acceleration: 2 g
• Digital Output - Number Of Bits: 12 bit
• Supply Voltage (max): 3.6 V
• Supply Voltage (min): 2.7 V
• Supply Current: 1 mA
• Maximum Operating Temperature: + 70 C
• Minimum Operating Temperature: - 20 C
• Digital Output - Bus Interface: I2C, SPI
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Other names: 497-4129; LIS3L02DQ; Q2094276

8.9 WAKE_UP_CFG (23h)
8.10 WAKE_UP_SOURCE (24h)
AOI
LIR
ZHIE
ZLIE
YHIE
YLIE
XHIE
XLIE
IA
ZH
ZL
YH
YL
XH
XL
And/Or combination of Interrupt events. Default value: 0
(0: OR combination of interrupt events; 1: AND combination of interrupt events)
Latch interrupt request into WAKE_UP_SOURCE reg with the WAKE_UP_SOURCE reg
cleared by reading WAKE_UP_ACK reg.
(0: interrupt request non latched 1: interrupt request latched)
Enable interrupt generation on Z high event. Default value:0
(o: disable interrupt request;1: enable int req on measured accel. value higher than preset
threshold)
Enable interrupt generation on Z low event. Default value:0
(0: disable interrupt request; 1: enable int req on measured accel. value higher than preset
threshold)
Enable interrupt generation on Y high event. Default value:0
(0: disable interrupt request; 1: enable int req on measured accel. value higher than preset
threshold)
Enable interrupt generation on Y low event. Default value:0
(0: disable interrupt request; 1: enable int req on measured accel. value higher than preset
threshold)
Enable interrupt generation on X high event. Default value:0
(0: disable interrupt request; 1: enable int req on measured accel. value higher than preset
threshold)
Enable interrupt generation on X low event. Default value:0
(0: disable interrupt request; 1: enable int req on measured accel. value higher than preset
threshold)
Interrupt Active.Default value:0
(0: no interrupt has been generated; 1:one or more interrupt event has been generated)
Z High. Default value: 0
(0: no interrupt; 1:ZH event has occurred)
Z Low.Default value: 0
(0: no interrupt; 1:ZL event has occurred)
Y High. Default value: 0
(0: no interrupt; 1:YH event has occurred)
Y Low. Default value: 0
(0: no interrupt; 1:ZH event has occurred)
X High. Default value: 0
(0: no interrupt; 1:XH event has occurred)
X Low. Default value: 0
(0: no interrupt; 1:XL event has occurred)
AOI
x
LIR
IA
ZHIE
ZH
ZLIE
ZL
YHIE
YH
YLIE
YL
XHIE
XH
XLIE
XL
LIS3L02DQ
15/20