1-853400-0 Tyco Electronics, 1-853400-0 Datasheet - Page 6

• Manufacturer Part Number: 1-853400-0
• Description: Tools, Extractors
• Manufacturer: Tyco Electronics
• Type: Crimp Tool Assemblyr

Specifications of 1-853400-0

• Features: 8-Pos. Modular Plug CAT 5 Die Set
• Connector Type: Modular Connector, 8 pos
• Crimp Handle: A9931-ND (2-231652-0)
• Product: Crimping, Stripping & Cutting Tools & Drills
• Description/function: Hand crimp tool assembly, modular plug
• For Use With: RJ45 Cables
• Lead Free Status / RoHS Status: na
• Crimp Or Cable Size: -
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant
• Other names: A9926

B. Die Closure Inspection
The tool and die set is inspected for proper operation
before shipment. To ensure uniform performance over
the life of the tool, periodically inspect as follows:
7. REPLACEMENT AND REPAIR
Customer-replaceable parts are provided in Figure 9.
The blade replacement kit and hand tool kits are
available separately. Refer to Figure 10 for a
description of each. A complete inventory should be
stocked and controlled to prevent lost time when
replacement of parts is necessary. Order replacement
parts through your representative, or call 1-800-526-
5142, or send a facsimile of your purchase order to
717-986-7605 or write to:
For tool evaluation and customer repair service, call 1-
800-526-5136.
8. REVISION SUMMARY
Since the previous release of these instructions, the
new company logo has been applied.
Rev M
1. Insert a properly stripped cable of appropriate
type and size into a sample modular plug. Then
insert the unterminated cable and plug into the die
cavity.
2. Squeeze tool handles together slowly, while
watching to ensure indenter bottoms against nest.
3. Release handles to open die set, and remove
terminated modular plug assembly.
4. Test for proper crimp height according to Section
4, Step 4. If plug crimp height is within acceptable
limits, lightly lubricate the tool and die set, and place
it back into service. If the crimp height is not within
acceptable limits, return the tool (with die set) for
evaluation (refer to Section 7).
CUSTOMER SERVICE (038-035)
TYCO ELECTRONICS CORPORATION
PO BOX 3608
HARRISBURG PA 17105-3608
408-9767
6 of 7