102.1947 FISCHER CONNECTORS, 102.1947 Datasheet - Page 64

• Manufacturer Part Number: 102.1947
• Description: SEALING CAP, MATING FACE OF RECEPTACLE
• Manufacturer: FISCHER CONNECTORS

Specifications of 102.1947

• Accessory Type: Sealing Cap
• Rohs Compliant: Yes
• For Use With: Mating Face Of The Receptacles
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

L
All FISCHER connectors contain this reliable, patented self-latching feature. However, non-latching cable plugs are provided
under the designation «SOV» and «SOVE». Panel plugs «SF» and «SFE» are non-latching by design.
FISCHER Automatic Latching - How it Works
TECHNICAL INFORMATION
3
When the connectors are mated, these protru-
sions are firmly captivated by the receptacle's
internal latching groove.
The drawing shows the longitudinal section of a
receptacle and a plug in the unmated position.
The latching sleeve of the plug has a fixed amount
of lengthwise play along the body. The flexible
fingers which extend from this sleeve possess
bevelled protrusions.
If the attached cable or clamp nut is pulled, the
tapered sleeve is forced under the sliding sleeve,
holding the fingers even more tightly into the
receptacle’s latching groove. The more the cable
or connector body is pulled, the more the locking
pressure increases.
Pulling lengthwise on the plug’s latching sleeve
unmates the connectors by allowing the fingers to
deflect free of the latching groove.