EPM7256AEQC208-7N Altera, EPM7256AEQC208-7N Datasheet - Page 11

• Manufacturer Part Number: EPM7256AEQC208-7N
• Description: IC PLD EEPROM 256 MACROCELL 7.5NS QFP208
• Manufacturer: Altera
• Series: MAX 7000AEr

Specifications of EPM7256AEQC208-7N

• Cpld Type: EEPROM
• No. Of Macrocells: 256
• No. Of I/o's: 164
• Propagation Delay: 7.5ns
• Global Clock Setup Time: 3.9ns
• Frequency: 172.4MHz
• Supply Voltage Range: 3V To 3.6V
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

MAX 7000A Programmable Logic Device Data Sheet
Parallel Expanders
Parallel expanders are unused product terms that can be allocated to a
neighboring macrocell to implement fast, complex logic functions.
Parallel expanders allow up to 20 product terms to directly feed the
macrocell OR logic, with five product terms provided by the macrocell and
15 parallel expanders provided by neighboring macrocells in the LAB.
The compiler can allocate up to three sets of up to five parallel expanders
to the macrocells that require additional product terms. Each set of five
parallel expanders incurs a small, incremental timing delay (t
). For
PEXP
example, if a macrocell requires 14 product terms, the compiler uses the
five dedicated product terms within the macrocell and allocates two sets
of parallel expanders; the first set includes five product terms, and the
second set includes four product terms, increasing the total delay by
2 × t
.
PEXP
Two groups of eight macrocells within each LAB (e.g., macrocells 1
through 8 and 9 through 16) form two chains to lend or borrow parallel
expanders. A macrocell borrows parallel expanders from lower-
numbered macrocells. For example, macrocell 8 can borrow parallel
expanders from macrocell 7, from macrocells 7 and 6, or from macrocells
7, 6, and 5. Within each group of eight, the lowest-numbered macrocell
can only lend parallel expanders, and the highest-numbered macrocell
can only borrow them.
Figure 4
shows how parallel expanders can be
borrowed from a neighboring macrocell.
Altera Corporation
11