LPC2138FBD64 NXP Semiconductors, LPC2138FBD64 Datasheet - Page 36

• Manufacturer Part Number: LPC2138FBD64
• Description: 16/32BIT MCU ARM7, 512K FLASH, 64LQFP
• Manufacturer: NXP Semiconductors

Specifications of LPC2138FBD64

• No. Of I/o's: 47
• Ram Memory Size: 32KB
• Cpu Speed: 60MHz
• No. Of Timers: 2
• No. Of Pwm Channels: 6
• Digital Ic Case: RoHS Compliant
• Core Size: 32bit
• Program Memory Size: 512KB
• Oscillator Type: External Only
• Controller Family/series: LPC21xx
• Rohs Compliant: Yes

NXP Semiconductors
12. Application information
LPC2131_32_34_36_38
Product data sheet
12.1 Crystal oscillator XTAL input and component selection
The input voltage to the on-chip oscillators is limited to 1.8 V. If the oscillator is driven by a
clock in slave mode, it is recommended that the input be coupled through a capacitor with
C
capacitor to ground C
slave mode, a minimum of 200 mV (RMS) is needed.
In slave mode the input clock signal should be coupled by means of a capacitor of 100 pF
(Figure
corresponds to a square wave signal with a signal swing of between 280 mV and 1.4 V.
The XTALOUT pin in this configuration can be left unconnected.
External components and models used in oscillation mode are shown in
Table 10
and the capacitances C
fundamental mode oscillation (the fundamental frequency is represented by L, C
R
not be larger than 7 pF. Parameters F
manufacturer.
Fig 13. Slave mode operation of the on-chip oscillator
i
S
= 100 pF. To limit the input voltage to the specified range, choose an additional
). Capacitance C
13), with an amplitude between 200 mV (RMS) and 1000 mV (RMS). This
and
Table
All information provided in this document is subject to legal disclaimers.
P
11. Since the feedback resistance is integrated on chip, only a crystal
in
g
Rev. 5 — 2 February 2011
which attenuates the input voltage by a factor C
Figure 14
X1
and C
X2
represents the parallel package capacitance and should
need to be connected externally in case of
OSC
XTAL1
C i
100 pF
LPC2xxx
, C
L
, R
LPC2131/32/34/36/38
S
002aae718
Single-chip 16/32-bit microcontrollers
C g
and C
P
are supplied by the crystal
i
© NXP B.V. 2011. All rights reserved.
/ (C
Figure 14
i
+ C
g
L
). In
and
and in
36 of 45