LM2931Z-5.0 National Semiconductor, LM2931Z-5.0 Datasheet - Page 18

• Manufacturer Part Number: LM2931Z-5.0
• Description: IC, V REG LDO +5.0V, 2931, TO-92-3
• Manufacturer: National Semiconductor

Specifications of LM2931Z-5.0

• Primary Input Voltage: 14V
• Output Voltage: 5V
• Dropout Voltage Vdo: 300mV
• No. Of Pins: 3
• Output Current: 100mA
• Voltage Regulator Case Style: TO-92
• Operating Temperature Range: -40°C To +85°C
• Svhc: No
• Output Voltage Fixed: 5V
• Rohs Compliant: Yes
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

National does not assume any responsibility for use of any circuitry described, no circuit patent licenses are implied and National reserves
the right at any time without notice to change said circuitry and specifications.
For the most current product information visit us at www.national.com.
LIFE SUPPORT POLICY
NATIONAL’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS
WITHOUT THE EXPRESS WRITTEN APPROVAL OF THE PRESIDENT AND GENERAL COUNSEL OF NATIONAL SEMICONDUCTOR
CORPORATION. As used herein:
1. Life support devices or systems are devices or systems
BANNED SUBSTANCE COMPLIANCE
National Semiconductor manufactures products and uses packing materials that meet the provisions of the Customer Products
Stewardship Specification (CSP-9-111C2) and the Banned Substances and Materials of Interest Specification (CSP-9-111S2) and contain
no ‘‘Banned Substances’’ as defined in CSP-9-111S2.
Leadfree products are RoHS compliant.
Physical Dimensions
NOTE: UNLESS OTHERWISE SPECIFIED.
1. EPOXY COATING.
2. 63Sn/37Pb EUTECTIC BUMP.
3. RECOMMEND NON-SOLDER MASK DEFINED LANDING PAD.
4. PIN A1 IS ESTABLISHED BY LOWER LEFT CORNER WITH RESPECT TO TEST ORIENTATION PINS ARE NUMBERED COUNTERCLOCKWISE.
5. XXX IN DRAWING NUMBER REPRESENTS PACKAGE SIZE VARIATION WHERE X
PACKAGE HEIGHT.
6. REFERENCE JEDEC REGISTRATION MO-211, VARIATION BC.
www.national.com
which, (a) are intended for surgical implant into the body, or
(b) support or sustain life, and whose failure to perform when
properly used in accordance with instructions for use
provided in the labeling, can be reasonably expected to result
in a significant injury to the user.
National Semiconductor
Americas Customer
Support Center
Email: [e-mail]
Tel: [phone]
National Semiconductor
Europe Customer Support Center
Deutsch Tel: [phone]
English
Français Tel: [phone]
inches (millimeters) unless otherwise noted (Continued)
Email: [e-mail]
Fax: [phone]
Tel: [phone]
X
NS Package Number BPA06HTB
1
= 0.955 X
6-Bump micro SMD
2
= 1.717 X
2. A critical component is any component of a life support
device or system whose failure to perform can be reasonably
expected to cause the failure of the life support device or
system, or to affect its safety or effectiveness.
1
IS PACKAGE WIDTH, X
3
= 0.850
National Semiconductor
Asia Pacific Customer
Support Center
Email: [e-mail]
2
IS PACKAGE LENGTH AND X
National Semiconductor
Japan Customer Support Center
Fax: [phone]
Email: [e-mail]
Tel: [phone]
3
IS