MCP3905L-I/SS Microchip Technology, MCP3905L-I/SS Datasheet - Page 13
![IC,Power Metering,SSOP,24PIN,PLASTIC](/photos/6/90/69064/mfg_mcp3905_sml.jpg)
MCP3905L-I/SS
Manufacturer Part Number
MCP3905L-I/SS
Description
IC,Power Metering,SSOP,24PIN,PLASTIC
Manufacturer
Microchip Technology
Datasheets
1.MCP3905L-ISS.pdf
(30 pages)
2.MCP3906A-ISS.pdf
(26 pages)
3.MCP3905L-ISS.pdf
(26 pages)
Specifications of MCP3905L-I/SS
Input Impedance
390 KOhm
Measurement Error
0.1%
Voltage - I/o High
2.4V
Voltage - I/o Low
0.85V
Current - Supply
2.7mA
Voltage - Supply
4.5 V ~ 5.5 V
Operating Temperature
-40°C ~ 85°C
Mounting Type
Surface Mount
Package / Case
24-SSOP (0.200", 5.30mm Width)
Meter Type
Single Phase
Operating Temperature Range
- 40 C to + 85 C
Mounting Style
SMD/SMT
Supply Voltage Range
4.5V To 5.5V
Digital Ic Case Style
SSOP
No. Of Pins
24
Rohs Compliant
Yes
Lead Free Status / RoHS Status
Lead free / RoHS Compliant
For Use With
MCP3905RD-PM1 - REFERENCE DESIGN FOR MCP3905MCP3905EV - BOARD DEMO FOR MCP3905
Lead Free Status / Rohs Status
Lead free / RoHS Compliant
3.14
HF
supplies the instantaneous real-power information. The
output is a periodic pulse output, with its period
proportional to the measured active (real) power, and to
the HF
states. This output is the preferred output for calibration
due to faster output frequencies, giving smaller
calibration times. Since this output gives instantaneous
active (real) power, the 2ω ripple on the output should
be noted. However, the average period will show
minimal drift.
3.15
F
device that supply the average real-power information.
The outputs are periodic pulse outputs, with its period
proportional to the measured active (real) power, and to
the F
states. These pins include high-output drive capability
for direct use of electromechanical counters and
2-phase stepper motors. Since this output supplies
average active (real) power, any 2ω ripple on the output
pulse period is minimal.
© 2009 Microchip Technology Inc.
OUT0
OUT
c
C
and F
constant, defined by the F0 and F1 pin logic
is the high-frequency output of the device and
High-Frequency Output (HF
Frequency Output (F
constant defined by F0, F1 and F2 pin logic
OUT1
are the frequency outputs of the
OUT0
, F
OUT
OUT1
)
)
MCP3905/06
DS21948E-page 13