LMC6034IM National Semiconductor, LMC6034IM Datasheet - Page 9

• Manufacturer Part Number: LMC6034IM
• Description: Operational Amplifier (Op-Amp) IC
• Manufacturer: National Semiconductor

Specifications of LMC6034IM

• No. Of Amplifiers: 4
• Slew Rate: 1.1V/µs
• No. Of Pins: 14
• Peak Reflow Compatible (260 C): No
• Leaded Process Compatible: No
• Mounting Type: Surface Mount
• Package / Case: 14-NSOIC
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant

Typical Single-Supply Applications
Additional single-supply applications ideas can be found in
the LM324 datasheet. The LMC6034 is pin-for-pin compat-
ible with the LM324 and offers greater bandwidth and input
resistance over the LM324. These features will improve the
performance of many existing single-supply applications.
Note, however, that the supply voltage range of the
LMC6034 is smaller than that of the LM324.
For good CMRR over temperature, low drift resistors should
be used. Matching of R3 to R6 and R4 to R7 affect CMRR.
Gain may be adjusted through R2. CMRR may be adjusted
through R7.
Low-Leakage Sample-and-Hold
Instrumentation Amplifier
DS011134-13
DS011134-14
(V
9
+
= 5.0 VDC)
Oscillator frequency is determined by R1, R2, C1, and C2:
This circuit, as shown, oscillates at 2.0 kHz with a
peak-to-peak output swing of 4.0V.
fosc = 1/2 RC, where R = R1 = R2 and
1 Hz Square-Wave Oscillator
Sine-Wave Oscillator
C = C1 = C2.
Power Amplifier
DS011134-16
www.national.com
DS011134-15
DS011134-17