PIC18F6520-E/PT Microchip Technology, PIC18F6520-E/PT Datasheet - Page 11

• Manufacturer Part Number: PIC18F6520-E/PT
• Description: IC,MICROCONTROLLER,8-BIT,PIC CPU,CMOS,TQFP,64PIN,PLASTIC
• Manufacturer: Microchip Technology
• Series: PIC® 18Fr

Specifications of PIC18F6520-E/PT

• Rohs Compliant: YES
• Core Processor: PIC
• Core Size: 8-Bit
• Speed: 40MHz
• Connectivity: I²C, SPI, UART/USART
• Peripherals: Brown-out Detect/Reset, LVD, POR, PWM, WDT
• Number Of I /o: 52
• Program Memory Size: 32KB (16K x 16)
• Program Memory Type: FLASH
• Eeprom Size: 1K x 8
• Ram Size: 2K x 8
• Voltage - Supply (vcc/vdd): 4.2 V ~ 5.5 V
• Data Converters: A/D 12x10b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 125°C
• Package / Case: 64-TFQFP
• Processor Series: PIC18F
• Core: PIC
• Data Bus Width: 8 bit
• Data Ram Size: 2 KB
• Interface Type: I2C, SPI, USART
• Maximum Clock Frequency: 40 MHz
• Number Of Programmable I/os: 52
• Number Of Timers: 2 x 8 bit
• Operating Supply Voltage: 4.2 V to 5.5 V
• Maximum Operating Temperature: + 125 C
• Mounting Style: SMD/SMT
• 3rd Party Development Tools: 52715-96, 52716-328, 52717-734, 52712-325, EWPIC18
• Development Tools By Supplier: PG164130, DV164035, DV244005, DV164005, PG164120, ICE2000, ICE4000, DV164136, DM183032, DM183022
• Minimum Operating Temperature: - 40 C
• On-chip Adc: 12 bit
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

9. Module: CCP
10. Module: Voltage Reference
TABLE 26-2:
 2005 Microchip Technology Inc.
Operating Conditions: 3.0V < V
D311
Param
No.
In Section 23.3.1 “Wake-up From Sleep”, the list
of peripheral interrupts which can wake the device
from Sleep has been updated. From the list of
11 events, item 4 has been clarified and item 5 has
been removed. The list now reads as follows:
1. PSP read or write.
2. TMR1 interrupt. Timer1 must be operating as
3. TMR3 interrupt. Timer3 must be operating as
4. CCP Capture mode interrupt (capture will not
5. MSSP (Start/Stop) bit detect interrupt.
6. MSSP transmit or receive in Slave mode
7. USART RX or TX (Synchronous Slave mode).
8. A/D conversion (when A/D clock source is RC).
9. EEPROM write operation complete.
10. LVD interrupt.
In Table 26-2: Voltage Reference Specifications
(page 317), parameter D311, V
replaced with the following (specifications and
conditions modified):
an asynchronous counter.
an asynchronous counter.
occur)
(SPI/I
V
2
RAA
Sym
C).
Specifications
VOLTAGE REFERENCE SPECIFICATIONS
Absolute Accuracy
Characteristics
DD
< 5.5V, -40°C < T
RAA
, should be
A
< +125°C (unless otherwise stated).
Min
—
11. Module: OSCCON Register
Typ
In the OSCCON register (Register 2-1, page 25),
the Reset value for the SCS bit (OSCCON<0>)
was incorrectly stated as R/W-1 and has been
changed to R/W-0
—
PIC18F6520/8520
Max
1/2
Units
LSb
Comments
DS80157D-page 11