HE1AN-P-DC9V-Y5 PANASONIC EW, HE1AN-P-DC9V-Y5 Datasheet - Page 8

• Manufacturer Part Number: HE1AN-P-DC9V-Y5
• Description: RELAY, POWER, SPST, 9VDC, 30A
• Manufacturer: PANASONIC EW

Specifications of HE1AN-P-DC9V-Y5

• Relay Type: Power
• Coil Voltage Vdc Nom: 9V
• Contact Current Max: 48A
• Coil Resistance: 42.2ohm
• Coil Type: DC
• Coil Current: 213mA
• Nom Operating Power: 1920mW
• Relay Mounting: Terminal Blade
• External: RoHS Compliant
• Contact Configuration: SPST
• Rohs Compliant: Yes

HE
2 Form A
MOUNTING METHOD
1. Plug-in type
NOTES
1. The dust cover should not be removed
since doing so may alter the
characteristics.
2. Avoid use under severe environmental
conditions, such as high humidity,
organic gas or in dust, oily locations and
locations subjected to extremely frequent
shock or vibrations.
3. When mounting, use spring washers.
Optimum fastening torque ranges from
49 to 68.6 Nm (5 to 7 kgf·cm).
For Cautions for Use, see
8
M4 screw
Washer
Faston No. 250
CAD Data
Relay Technical Information.
External dimensions
Single side stable type
M4.0
M.157
2-4.5 dia.
2-.177 dia.
M3.5
M.138
.138
2. Screw terminal type
4. Firmly insert the receptacles so that
there is no slack or looseness. To remove
a receptacle, 19.6 to 39.2 N (2 to 4 kg) of
pulling strength is required. Do not
remove more than one receptacle at one
time. Always remove one receptacle at a
time and pull it straight outwards.
5. When using the AC type, the operate
time due to the in-rush phase is 20 ms or
more. Therefore, it is necessary for you
to verify the characteristics for your actual
circuit.
3.5
1.575
1.433
1.319
1.969
2.008
33.5
51.0
40.0
36.4
14.4
.567
50.0
R4
R.157
M4 screw
Washer
General tolerance: 0.3
21.5
.846
1.752
44.5
.295
7.5
17.5
.689
16.5
.650
0.8
.031
.012
3. Allowable installation wiring size for
screw terminal types and terminal
sockets
Due to the UP terminals, it is possible to
either directly connect the wires or use
crimped terminal.
6. When using the push-on blocks for the
screw terminal type, use crimped
terminals and tighten the screw-down
terminals to the torque below.
M4.5 screw:
147 to 166.6 Ncm (15 to 17 kgf·cm)
M4 screw:
117.6 to 137 N·cm (12 to 14 kgf·cm)
M3.5 screw:
78.4 to 98 N·cm (8 to 10 kgf·cm)
2-4.5±0.1 dia.
2-.177±.004 dia.
Schematic (Bottom view)
ds_61C06_en_he: 150509D
Single side stable type
6
1
Panel cutout
2
Tolerance: 0.1
1.575±.004
3
40±0.1
4
5
.004