10-1119.1199 EAO, 10-1119.1199 Datasheet - Page 7

• Manufacturer Part Number: 10-1119.1199
• Description: FILAMENT LAMP
• Manufacturer: EAO

Specifications of 10-1119.1199

• Supply Voltage: 48V
• Current Rating: 25mA
• For Use With: SWISSTAC Series Switches
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

Mounting instruction
The switch is mounted in a fascia or control panel in two steps:
1. Insert indicator from the back side in fascia/control panel.
2. Snap on bezel and tighten fixing nut.
0
Lens
0
>
The press ring is fitted between glan and lens. The seal is effective when the lens is snapped into place.
0
>
The buzzer is mounted in a fascia or control panel in two steps:
1. Insert buzzer from the back side in fascia/control panel.
2. Snap on bezel and tighten fixing nut.
0
Buzzer element
0
>
The switch is mounted in a fascia or control panel in three steps:
1. Detach terminal block as in drawing, remove fixing nut.
2. Insert switch from the front in fascia/control panel.
3. Reassemble the switch in the reverse order.
0
To detach terminal block
0
Note: Type-identification on legs of actuator !
Indicator 30 - 70 mm
Indicator 30 - 70 mm, sealing gland and sealing ring
Buzzer 30 - 55 mm
Pushbutton illuminated 35 mm
Bezel
Bezel
Indicator
Buzzer housing
Swisstac
02.2009
5