10-1119.1199 EAO, 10-1119.1199 Datasheet - Page 9

• Manufacturer Part Number: 10-1119.1199
• Description: FILAMENT LAMP
• Manufacturer: EAO

Specifications of 10-1119.1199

• Supply Voltage: 48V
• Current Rating: 25mA
• For Use With: SWISSTAC Series Switches
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

Mounting instruction
The switch is mounted in a fascia or control panel in three steps:
1. Detach front section just in released position, as in drawing.
2. Insert switch from the back side in fascia/control panel.
3. Snap on front section and tighten fixing nut.
0
Zero position
0
Imortant for protection class IP 65 !
With models to IP 65, the sealing ring
(IP 65 model) is used.
Sealing ring
>
Note !
Mounting : The torque with which the fixing nut ist tightened must not exeed 50 Ncm.
Dismounting : Dismantling of switching element just with dismantling tool.
0
>
The switch is mounted in a fascia or control panel in three steps:
1. Detach terminal block as in drawing, remove fixing nut.
2. Insert switch from the front in fascia/control panel.
3. Reassemble the switch in the reverse order.
0
To detach terminal block
0
>
Stop pushbutton 55 - 70 mm, key to unlock
Emergency-stop switch foolproof, EN IEC 60947-5-5
Keylock switch 45 mm
2)
is fitted as standard in models to IP 65.
Legend plate
1)
is already fitted. This must be removed if the SWISSTAC emergency-stop legend plate
Wiring diagram
Swisstac
02.2009
7