E3S-CD12 Omron, E3S-CD12 Datasheet - Page 6

• Manufacturer Part Number: E3S-CD12
• Description: Photoelectric Sensor
• Manufacturer: Omron
• Type: Long Range Metal Body Sensorr
• Series: E3S-Cr

Specifications of E3S-CD12

• Output Current: 100mA
• Supply Voltage Range Dc: 10V To 30V
• Sensor Housing: Rectangular
• Sensor Input: Optical
• Sensing Range Max: 2m
• Switch Terminals: Wire Leaded
• Features: Mutual interference protection
• Height: 29.5 mm
• Length: 50 mm
• Maximum Operating Temperature: + 55 C
• Minimum Operating Temperature: - 25 C
• Operating Supply Voltage: 10 V to 30 V
• Width: 40.4 mm
• Sensing Distance: 2000 mm
• Output Configuration: NPN or PNP
• Sensing Method: Reflective, Diffuse
• Sensing Object: White Paper
• Sensing Light: Infrared
• Mounting Type: Bracket Mount, Horizontal
• Current - Supply: 40mA
• Voltage - Supply: 10 V ~ 30 V
• Package / Case: Module, Connector
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant, Lead free / RoHS Compliant

Nomenclature
Horizontal Model
Safety Precautions
Refer to Warranty and Limitations of Liability.
This product is not designed or rated for ensuring
safety of persons either directly or indirectly.
Do not use it for such purposes.
Do not use the product in atmospheres or environments that exceed
product ratings.
● Designing
Fuzzy Mutual Interference Prevention Function
If Reflective Sensors are installed side by side, each Sensor may be
influenced by the light emitted from the other Sensors.
The fuzzy mutual interference prevention function of the E3S-C
enables the E3S-C to monitor any light interference for a certain
period before the E3S-C starts emitting light so that the E3S-C can
retrieve the intensity and frequency of the light interference as data.
Using this data, the E3S-C estimates with fuzzy inference the risk of
the malfunctioning of the E3S-C and controls the timing of the E3S-
C’s light emission.
When the risk is low:
The E3S-C waits until there is no light interference and emits light.
When the risk is high:
The E3S-C emits light between each period of light interference.
● Wiring
Cable
● Mounting
Mounting
• The E3S-C uses an oil-resistive cable to ensure oil resistivity.
• Do not allow the cable to be bent to a radius of less than 25 mm.
• When mounting the E3S-C, do not hit the E3S-C with a hammer, or
• Use M4 screws to mount the E3S-C. The tightening torque of each
Output selector *1
the E3S-C will loose watertightness.
screw must be 1.18 N·m maximum.
indicator
Stability
(green)
Emission
pattern
Emission
pattern
Light
interference
Light
interference
Precautions for Correct Use
S
Min
E3S-CD12
WARNING
SENS
PNP
NPN
D·ON
L·ON
Max
L
Operation panel
cover
Light
indicator
(red)
Sensitivity
adjuster
Operation
selector *2
Model number
Vertical Model
Note: The sensitivity adjuster on Through-beam and Retro-reflective Models is
*1. Use the output selector to select the type of output transistor, NPN or PNP.
*2. Use the operation selector to select the operation mode.
Mounting Bracket
Direct Mounting
Mount the E3S-C as shown in the following illustration.
Mounting with M4 Screws
Mounting with M3 Screws
Optical Axis Adjustment
Optical Lock Holes
By inserting screws into the
optical axis lock holes, the
Mounting Bracket will be in the
direction of the optical axis of the
E3S-C.
• When mounting the E3S-C with the mounting bracket so that
• If it is not possible to mount the E3S-C so that the sensing objects
Stability indicator
Output selector *1
Operation
selector *2
sensing objects will be in the direction of the mechanical axis, use
the optical axis lock holes.
will be in the direction the mechanical axis, move the E3S-C
upwards, downwards, to the left, or to the right and secure the E3S-
C in the center of the range where the light indicator will be lit, at
which time make sure that the stability indicator is lit.
different.
(green)
S
PNP
NPN
D
ON
L
ON
M4
Optical
axis
Min
L
SENS
Mounting axis
Max
Light indicator
(red)
Operation panel
cover
Sensitivity
adjuster
Two, M3
M4 hole
Two, 4.5 dia.
through holes
M4 hole
E3S-C
M4 hole
Four optical
axis lock
holes (M4)
M3
M4 hole
6