SM91EANQD BANNER ENGINEERING, SM91EANQD Datasheet - Page 18

• Manufacturer Part Number: SM91EANQD
• Description: Photoelectric Sensor
• Manufacturer: BANNER ENGINEERING

Specifications of SM91EANQD

• Output Current: 150mA
• Sensor Output: NPN/PNP
• Supply Voltage Range Dc: 10V To 30V
• Peak Reflow Compatible (260 C): No
• Sensor Input: Optical
• Sensing Range Max: 30m
• Leaded Process Compatible: No

344
VALU-BEAM
Supply Voltage and Current
Output Configuration
Output Rating
Output Protection Circuitry
Output Response Time
Adjustments
Indicators
Construction
Environmental Rating
Connections
Operating Conditions
Application Notes
Certifications
Supply Protection Circuitry
®
915 Series Sensors
SMW915 Series: 12 to 28V ac or dc at 50 mA maximum, exclusive of load
SMA915 Series: 90 to 130V ac (50-60 Hz) at 20 mA maximum, exclusive of load
SMB915 Series: 210 to 250V ac (50-60 Hz) at 20 mA maximum, exclusive of load
Exceptions: SMA91E and ESR emitters, which operate from 10-250V ac (50-60 Hz) or dc (10 mA max.)
Protected against transient voltages
One internal “form C” (single-pole double-throw) electromechanical relay
Max. switching power (resistive load) = 150 W, 600 VA
Max. switching voltage (resistive load) = 250V ac or 30 V dc (120V ac max. per UL & CSA)
Max. switching current (resistive load) = 5A
Min.. voltage and current = 1 amp at 5V dc, 0.1 amp at 24V dc
Peak switching voltage = 750V ac (transient suppression recommended)
Mechanical life of relay = 10,000,000 operations
Protected against false pulse on power-up
20 milliseconds ON and OFF; independent of signal strength
(NOTE: 100 millisecond relay on power-up; relay de-energized during this time)
SENSITIVITY control on rear of sensor allows precise gain setting (turn clockwise to increase gain)
Top-mounted red LED indicator lights whenever the sensor sees “light” condition.
Models SMA91E and SMA91ESR emitters have visible-red “tracer beam” which indicates “power on” and
enables easy “line-of-sight” alignment.
Reinforced black thermoplastic polyester housing, totally encapsulated, molded acrylic lenses and stainless
steel hardware
Meets NEMA standards 1, 2, 3, 3S, 4, 4X, 12 and 13; IEC IP66
PVC-jacketed 2 m (6.5') or 9 m (30') cable or 5-pin mini-style quick-disconnect (QD) fitting available. See
page 368 and Accessories section.
Temperature:
Maximum relative humidity: 90% at 50°C (non-condensing)
Install transient suppressor (MOV) across any output contact which switches an inductive load
Banner Engineering Corp. • Minneapolis, U.S.A. • www.bannerengineering.com • Tel: [phone]
915 Series Specifications
-40° to +50° C (-40° to +122°F)