T30UIPB BANNER ENGINEERING, T30UIPB Datasheet - Page 3

• Manufacturer Part Number: T30UIPB
• Description: Ultrasonic Sensor
• Manufacturer: BANNER ENGINEERING

Specifications of T30UIPB

• Sensing Range Min: 300mm
• Sensing Range Max: 2m
• Switching Frequency: 128kHz
• External Diameter: 40mm
• Operating Temperature Range: -20°C To +70°C
• Peak Reflow Compatible (260 C): No
• Output Type: Transistor
• Contact Rating: 20mA
• Leaded Process Compatible: No

Banner Engineering Corp.
www.bannerengineering.com • Tel: [phone]
•
Minneapolis, MN U.S.A.
U-GAGE
™
Teaching Identical Limits for Both Analog and Discrete Outputs Simultaneously
To set both the analog and the discrete outputs at exactly the same limits, both may be
set simultaneously.
1. Push and hold either the Analog or the Discrete programming push button until the
2. Position the target for the first limit and “click” either programming push button.
3. Position the target for the second limit and “click” either button again to teach the
4. The green Power LED will come ON to indicate that the sensor will now function in
Figure 1.
General Notes on Programming:
1. The sensor will return to RUN mode if the first TEACH condition is not registered
2. After the first limit is taught, the sensor will remain in PROGRAM mode until the
3. Press and hold the programming push button > 2 seconds (before teaching the
T30 Series with Analog and Discrete Outputs
yellow Output LED turns ON. Push and hold the other push button until its yellow
Output LED turns ON. The sensor is waiting for the first limit.
Both yellow LEDs will flash to acknowledge receiving the first window limit; the
sensor is now waiting for the second limit.
sensor the second limit.
normal RUN mode; both yellow Output LEDs will remain ON if the outputs are
conducting within the window limits.
within 120 seconds.
TEACH sequence is finished.
second limit) to exit PROGRAM mode without saving any changes. The sensor will
revert to the last saved program.
Programming Push Button
Yellow Analog Output LED
Green Power ON/OFF LED
U-GAGE T30 Series sensor programming push buttons and indicators
Analog Output
POWER
ANALOG
U-GAGE
OUTPUT
DISCRETE
SIGNAL
™
Red Signal Strength LED
Yellow Discrete Output LED
Discrete (Switched) Output
Programming Push Button
A N
P O
A L
W E
U - G
O G
R
O U
T P
A G
U T
D I S
S I G
E ™
N A
C R
E T E
L
P/N 57438 Rev. C
3