T30UXDC BANNER ENGINEERING, T30UXDC Datasheet - Page 7

• Manufacturer Part Number: T30UXDC
• Description: T30UX Series W/ Discrete Output
• Manufacturer: BANNER ENGINEERING

Specifications of T30UXDC

• Range: 300 Mm To 3 M
• Input: 10 To 30V Dc
• Output: NPN PNP NO NC Selectable
• Body Style: Round
• Range, Measurement: 300 mm to 3 m
• Response Time: 135 ms
• Voltage, Supply: 10-30 VDC
• Accessories Available: Cordsets and Brackets
• Lead Free Status / Rohs Status: RoHS Compliant part

NOTE 1: NPN
Sensing Range
Ultrasonic Frequency
Supply Voltage
Supply Protection Circuitry
Output Configuration
Output Rating
Output Protection Circuitry
Output Response Time
Delay at Power-up
Temperature Effect
Repeatability
Sensing Hysteresis
Minimum Window Size
Adjustments
Indicators
Construction
Environmental rating
Connections
Operating Conditions
Vibration and
Mechanical Shock
Application Note
Certifications
Banner Engineering Corp. • Minneapolis, MN U.S.A
www.bannerengineering.com • Tel: [phone]
< 200 µA for load impedance > 3 kΩ; for load current of 100 mA, leakage < 1% of load current
The temperature warmup drift upon power-up is less than 1% of the sensing distance.
“A” suffix models: 100 mm to 1 m (3.9" to 39")
“B” suffix models: 200 mm to 2 m (7.8" to 78")
“C” suffix models: 300 mm to 3 m (11.8" to 118")
“A” suffix models: 224 kHz
“B” suffix models: 174 kHz
“C” suffix models: 114 kHz
10 to 30V dc (10% max. ripple) at 40 mA, exclusive of load
Protected against reverse polarity and transient voltages
Discrete (switched) output models: SPST solid-state switch. Configurable as NPN (sinking) or PNP (sourcing) via
Mode push button. Normally Open (NO) or Normally Closed (NC) operation is also selectable via Mode push button
(see page 3).
The default setting is PNP/NO
Discrete output models: 100 mA max.
OFF-state leakage current: NPN: < 200 µA @ 30V dc (see NOTE 1)
ON-state saturation voltage: NPN: < 1.6V @ 100 mA
Protected against short circuit conditions
“A” suffix models: 45 milliseconds
“B” suffix models: 92 milliseconds
“C” suffix models: 135 milliseconds
500 ms
0.02% of distance/ºC
“A” suffix models: 0.1% of distance (0.5 mm min.)
“B” suffix models: 0.1% of distance (1.0 mm min.)
“C” suffix models: 0.1% of distance (1.5 mm min.)
“A” suffix models: 2 mm
“B” suffix models: 3 mm
“C” suffix models: 4 mm
10 mm (0.4")
Sensing window limits: TEACH-Mode configuration of near and far window limits may be set using the push button
or remotely via TEACH input (see pages 4-6).
Output Configuration: NPN, PNP, Normally Open (NO), Normally Closed (NC) select (see pages 3 or 6).
Advanced configuration options: Push button enabled/disabled, temperature compensation enabled/disabled (see
See page 2
Housing: PBT polyester
Transducer: epoxy /ceramic composite
Leakproof design, rated IEC IP67 (NEMA 6)
2 m (6.5’) or 9 m (30’) shielded 4-conductor (with drain) PVC cable, 150 mm (6”) PUR Euro-style pigtail (QPMA), or
4-pin integral Euro-style connector (Q8)
Temperature: −40 to 70º C (−40 to +158º F)
Max. Relative Humidity: 95% at 50ºC non-condensing
All models meet Mil. Std. 202F requirements method 201A (vibration: 10 to 60 Hz max., double amplitude 0.06", max
acceleration 10G). Also meets IEC 947-5-2; 30G 11 ms duration, half sine wave
CE Pending
U-GAGE
Push buttons: polyester
Specifications
®
T30UX Series with Discrete Output
page 6)
PNP: < 3V @ 100 mA
PNP: < 10 µA @ 30V dc
P/N 138381 rev. B
7