963-32-RED/WHITE-2"X50YD 3M, 963-32-RED/WHITE-2"X50YD Datasheet - Page 2

• Manufacturer Part Number: 963-32-RED/WHITE-2"X50YD
• Description: TAPE, REFLECTIVE, RED/WHITE, 2INX50YD
• Manufacturer: 3M

Specifications of 963-32-RED/WHITE-2"X50YD

• Roll Length: 50yard
• Tape Type: Reflective
• Width: 2"
• Color: RedWhite

Coefficient of Retroreflection
The minimum coefficient of retroreflection values of these sheetings when new are given in Table A in
terms of candelas per lux per square meter. Measurements are made for samples applied to an aluminum
panel in accordance with ASTM E-810 “Standard Test Method for Coefficient of Retroreflective
Sheeting” and represent an average of values at 0 and 90 degree orientations.
Table A. Minimum Coefficient of Retroreflection (R
1
2
Typical Physical Properties
The following technical information should be considered typical only and should not be used for
specification purposes.
Observation Angle – the angle formed by the light beam striking the reflective surface and the light beam returning to the observer
Entrance Angle – the angle formed by a light beam striking a surface at a point and a line perpendicular to the surface at the same point.
Property
Thickness
Gloss
Whiteness
Dimensional Stability
Flexibility
High Pressure Wash Test
Adhesion 90º Hanging Weight
Minimum Application Temperature
Instron Peel Adhesion
Chemical Resistance
Corrosion Resistance
Impact Resistance
2
963 White
963 Red
Entrance Angle
ASTM D523 @ 85º
ASTM E1164
ASTM D4956
0.125 inch mandrel @ 32ºF (0ºC)
45º angle, 1200 psi, 8 inch distance
ASTM D4956
12 inch/minute, 90º pullback
ASTM B-117 Salt Spray
Room Temperature, 100 inch/lb, 5/8 inch tip
Cold temperature, 60 inch/lb at -20ºF
250
Table B. Physical Properties for New Sheeting
-4º
60
0.2º
250
30º
60
2
Value
0.010 inch – 0.014 inch (.25 – .36mm)
100
> 15 white, > 2.5 red
< 0.125 inch change on 9 x 9 panel
No cracking
No delamination from panel
< 2 inch (55mm) movement
50ºF (10ºC)
3.0 lbs./inch or greater on typical substrates
Not affected by toluene, #2 diesel fuel, gasoline,
kerosene, TSP detergent, xylene, dilute metal
brighteners
No effect in 1000 hours
No damage outside impact area
No damage outside impact area
1
Observation Angle
45º
A
60
15
) for New Sheeting (cd/lux/m
-4º
65
15
0.5º
30º
65
15
2
)
45º
15
4