963-32-RED/WHITE-2"X50YD 3M, 963-32-RED/WHITE-2"X50YD Datasheet - Page 3

• Manufacturer Part Number: 963-32-RED/WHITE-2"X50YD
• Description: TAPE, REFLECTIVE, RED/WHITE, 2INX50YD
• Manufacturer: 3M

Specifications of 963-32-RED/WHITE-2"X50YD

• Roll Length: 50yard
• Tape Type: Reflective
• Width: 2"
• Color: RedWhite

Maintenance
Cleaning
Routine washing is recommended for maximum
performance. The following cleaning methods are
recommended:
• Wash with sponge, cloth or soft brush using
• Standard high-pressure hand spray:
• When using metal brighteners, follow
Storage
• Store in a cool, dry area out of direct sunlight.
• Temperature 65-75ºF (18-24ºC)
• Humidity 30-50%
• Store rolls horizontally, in carton or in original
Shelf Life
Apply series 963 markings within one year of
receipt of material.
Health and Safety Information
Read all health hazard, precautionary, and first aid
statements found in the Material Safety Data Sheet
and/or product label of chemicals prior to handling
or use.
General Performance Considerations
Series 963 markings will provide maximum
durability when:
• 3M recommended procedures are followed.
• Markings are applied to vertical surfaces
Actual durability will be based on actual customer
use conditions. Durability can be reduced if
recommended techniques are not followed,
including:
water and detergent.
Maximum pressure – 1200 PSI/80 bar.
Maximum water/wash solution temperature –
140ºF/60ºC.
Minimum of 12 inches/30cm distance between
spray tips and markings.
Cleaning wand or spray tips to be at no greater
angle than 45 degrees from perpendicular to the
marking’s surface.
Use Spray Tip – #1505 (15 deg spray angle,
05 capacity size)
manufacturer’s recommendations for dilution.
Thoroughly rinse from marking after soaking
vehicle.
packaging.
(within +20º).
3
• Improper application or surface preparation.
• Failure to cut markings around rivets, seams and
• Improper use of high pressure cleaning.
• Spillage of chemicals or solvents.
Warranty
3M warrants that 3M
Conspicuity Markings Series 963 sold by 3M to be
used for markings in the United States and Canada
will remain effective for the intended use and
meet the stated minimum values for coefficient of
retroreflection for 5 years when applied on vertical
(+20º) surfaces. If the 3M reflective marking is
applied in accordance with all 3M application and
fabrication procedures, including the exclusive use
of 3M recommended application equipment; and if
the emblem or marking deteriorates due to natural
causes, such as fading, cracking, peeling, lifting,
or discoloration; 3M’s sole responsibility and
purchaser’s exclusive remedy shall be that 3M will
provide replacement of the 3M material.
Conditions
Such failures must be solely the result of design
or manufacturing defects in the 3M reflective
markings and not of outside causes such as:
improper handling, maintenance or installation;
use of application procedures not recommended
by 3M; failure of substrate; exposure to chemicals,
abrasion and other mechanical damage from
fasteners used to mount the marking; collisions,
vandalism or malicious mischief.
3M reserves the right to determine the method of
replacement.
Replacement markings will carry the unexpired
warranty of the markings they replace.
Claims made under this warranty will be honored
only if 3M is notified of a failure within a
reasonable time, reasonable information requested
by 3M is provided, and 3M is permitted to verify
the cause of the failure.
Limitation of Liability
3M’s liability under this warranty is limited to
replacement as stated herein, and 3M assumes
no liability for any incidental or consequential
damages, such as lost profits, business or revenues
in any way related to the product regardless of the
legal theory on which the claim is based.
THIS WARRANTY IS MADE IN LIEU OF
ALL OTHER WARRANTIES, EXPRESS OR
IMPLIED, INCLUDING BUT NOT LIMITED
TO THE IMPLIED WARRANTIES OF
body panels.
™
Flexible Prismatic