AZ8169 PANASONIC EW, AZ8169 Datasheet - Page 10

• Manufacturer Part Number: AZ8169
• Description: LIMIT SW, WOBBLE COIL SPRING LEVER, SPDT
• Manufacturer: PANASONIC EW

Specifications of AZ8169

• Actuator Style: Wobble Coil Spring Lever
• Operating Force Max: 0.88N
• Contact Voltage Ac Max: 250V
• Contact Voltage Dc Max: 125V
• Contact Current Ac Max: 5A
• Contact Current Dc Max: 400mA
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

VL (AZ8)
4. Lamp holder
1) As shown in the photograph, wrench a
minus-driver in the gap between the
cover and the part of the indicator holder
indicated by the arrow in the direction of
insertion, and raise the lamp a little.
2) After removing the indicator holder,
insert it in the reverse direction, and
push it in until a snap is heard.
3) After changing the direction of the
indicator holder, put the cover on it in
such a way that the spring touches the
top of the terminal screw.
(Unless the spring rests completely on
the terminal screw, distortion of the
spring, failure in lighting of the lamp or
short circuit may result.)
60
Spring
Driver
Cover
Lamp
holder
5. Spring type
1) When loads are connected to both
N.O. and N.C. only the indicatin at non-
operation time can be used.
2) Take special care not to damage or
deform the contact spring during change
of indicator holder direction or during
connection work.
3) In the case of VL limit switch with
neon lamp, if the lamp is connected in
series in a 100V circuit, the lamp ceases
to be lighted.
However, for a 200V circuit, up to 2
lamps can be connected in series.
6. Lead type
1) When loads are connected to both
N.O. and N.C. indication can be given on
both N.O. and N.C. sides, but it is impos-
sible to connect the indication circuit to
the load in series and parallel.