D4NH3132H Omron, D4NH3132H Datasheet - Page 11

• Manufacturer Part Number: D4NH3132H
• Description: LIMIT SWITCH, SPDT-1NO/1NC
• Manufacturer: Omron
• Series: D4NHr

Specifications of D4NH3132H

• Contact Voltage Ac Max: 240V
• Contact Voltage Dc Max: 250V
• Contact Current Ac Max: 10A
• Contact Current Dc Max: 2.5A
• Switch Terminals: Screw
• Contact Configuration: SPDT-1NO / 1NC
• Circuitry: SPDT-1NO/1NC
• Lead Free Status / RoHS Status: na

Recommended Connectors
Use connectors with screws not exceeding 9 mm, otherwise the
screws will protrude into the case interior, interfering with other
components in the case. The connectors listed in the following table
have connectors with thread sections not exceeding 9 mm. Use the
recommended connectors to ensure conformance to IP67.
Use LAPP connectors together with Seal Packing (JPK-16, GP-13.5,
or GPM20), and tighten to the specified tightening torque. Seal
Packing is sold separately.
G1/2
Pg13.5
M20
1/2-14NPT
• LAPP is a German manufacturer.
• Before using a 2-conduit 1/2-14NPT type, attach the enclosed
adaptor to the Switch and then connect the recommended
connector.
Size
LAPP
LAPP
LAPP
LAPP
Manufacturer
ST-PF1/2
5380-1002
ST-13.5
5301-5030
ST-M20 × 1.5
5311-1020
ST-NPT1/2
5301-6030
Model
Applicable cable
6.0 to 12.0 mm
6.0 to 12.0 mm
7.0 to 13.0 mm
6.0 to 12.0 mm
diameter
Others
• When attaching a cover, be sure that the seal rubber is in place and
• Do not use any screws to connect the cover other than the
that there is no foreign material present. If the cover is attached
with the seal rubber out of place or if foreign material is stuck to the
rubber, a proper seal will not be obtained.
specified ones. The seal characteristics may be reduced.
D4NH
11