H5CX-L8D-N AC24/DC12-24 Omron, H5CX-L8D-N AC24/DC12-24 Datasheet - Page 19

• Manufacturer Part Number: H5CX-L8D-N AC24/DC12-24
• Description: Digital Multifunction Timer
• Manufacturer: Omron

Specifications of H5CX-L8D-N AC24/DC12-24

• Time Range: 0.001s-9999hrs
• Power Consumption: 2.4W
• Reset Time: 20ms
• Character Size: 11.5mm
• Time Range Min: 0.001s
• Supply Voltage Min: 12V
• Connector Type: 8-Pin Socket
• Signal Input Type: PNP/NPN
• No. Of Digits / Alpha: 4
• Rohs Compliant: Yes
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• For Use With: PNP/NPN

Operation in Run Mode
Operating Procedures for Timer Function
Present Value and Set Value
These items are displayed when the power is turned ON. The present
value is displayed in the main display and the set value is displayed
in the sub-display.
The values displayed will be determined by the settings made for the
time range and the timer mode in function setting mode.
Present Value and ON Duty Ratio (Output Mode = Z)
The present value is displayed in the main display and the ON duty
ratio is displayed in the sub-display. Set the ON duty ratio used in ON/
OFF-duty-adjustable flicker mode (Z) as a percentage.
The output accuracy will vary with the time range, even if the ON duty
ratio setting is the same. Therefore, if fine output time adjustment is
required, it is recommended that the time range for the cycle time is
set as small as possible.
Examples: 1. When Time Range = - - - - s (9999 s)
If a cycle time is set, cyclic control can be performed in ON/OFF-duty-
adjustable flicker mode simply by changing the ON duty ratio.
Present Value and Cycle Time (Output Mode = Z)
The present value is displayed in the main display and the cycle time
is displayed in the sub-display. Set the cycle time.
ON time = Cycle time x
When Output Mode Z Is Selected
2. When Time Range = - -. - - s (99.99 s)
20.00(s) x
Rounded off to the nearest integer (because of the
time range setting) → ON time = 6 s
Rounded off to 2 decimal places (because of the time
range setting) → ON time = 6.20 s
20(s) x
31(%)
100
31(%)
100
ON duty ratio (%)
= 6.2(s)
100
= 6.200(s)
Present value
Set value
Present value
ON duty ratio
Present value
Cycle time
Set each digit for the output time using the corresponding
Note: H5CX-L8E@-N Precautions
Set each digit for the output time using the corresponding
(The
Set each digit for the output time using the corresponding
Set the Timer’s set value before using the Timer in a self-holding circuit.
keys for the 4th digit cannot be used.)
Control output
ON duty (%)
Cycle time
Elapsed cycle time
ON duty set as a percentage
Up/Down keys used for analog
adjustment of the ON duty
H5CX-A@-N/-L@-N
keys.
keys.
keys.
closing valve
Opening/
Close
ON duty
Open
Fully closed↔
Timer
0%↔100%
Fully open
19