CS1W-CN313 Omron, CS1W-CN313 Datasheet - Page 108

• Manufacturer Part Number: CS1W-CN313
• Description: "CABLE CS1 EXP I/O,30cm"
• Manufacturer: Omron

Specifications of CS1W-CN313

• Lead Free Status / Rohs Status: Lead free / RoHS Compliant

3-2-1
3-2-2
86
Power Supply Unit
CQM1-PA203
CQM1-PA206,
CQM1-PA216
CQM1-PD026
Model number
Power Supply Unit Components
Selecting a Power Supply Unit
5 V DC, 3.6 A (18 W)
5 V DC, 6.0 A; 24 V DC output, 0.5 A (30 W total)
The total power consumption from the 5-V DC supply and 24-V DC output must be less than 30 W. In
other words: 5 V DC current consumption
5 V DC, 6 A (30 W)
The following diagram shows the basic components of a Power Supply Unit.
Crimp Terminals
Use the crimp terminals shown below for Power Supply Unit wiring. The con-
nectors should be less than 7 mm wide and the wires should be between 1.04
and 2.63 mm
As mentioned previously, there are three AC Power Supply Units and one DC
Power Supply Unit. Select the appropriate Power Supply Unit based on the
total 5-V DC current requirements of the Units in the configured system and
the 24-V DC output terminals (PA206/PA216).
Calculation Example:
To calculate the capacity required for a PC configuration consisting of the
CPU Unit (e.g., CPU21), two 16-point DC Input Units, and three 16-point Con-
tact Output Units, perform the following calculation:
CPU Unit (CPU21) current capacity + 16-point Input Unit current capacity
+ 16-point Contact Output Unit current capacity
A Power Supply Unit with a capacity of at least 3.54 A is required.
AC power
DC power
3 = 3.54
Power supply
2
.
5 + 24 V DC current consumption
Capacity
CQM1-PA203
CQM1-PA206
CQM1-PA216
CQM1-PD026
Model number
Power Indicator
Lit when power is being supplied.
External terminals
3 = 0.82 + 0.085
7.0 mm max.
7.0 mm max.
7.0 mm max.
24
Crimp terminal
30 (W).
Section 3-2
2 + 0.85
2