MINI MCR-SL-1-1 Phoenix Contact, MINI MCR-SL-1-1 Datasheet - Page 5

• Manufacturer Part Number: MINI MCR-SL-1-1
• Description: INTERFACE ANALOG
• Manufacturer: Phoenix Contact

Specifications of MINI MCR-SL-1-1

• Input Type: Standard Signals
• Output Type: Standard Signals
• No. Of Output Channels: 1
• Accuracy: ± 0.1%
• Supply Voltage Range: 19.2VDC To 30VDC
• Power Consumption: 450mW
• Approval Bodies: CE, UL Recognised
• External: RoHS Compliant
• External Depth: 102.5mm
• Rohs Compliant: Yes
• External Length / Height: 93.1mm

The assignment of the connecting terminal blocks is shown in Figure 4.
Block Diagram
Figure 4
The MINI Analog module can be snapped onto all
35 mm DIN rails corresponding to EN 60715.
101946_02_en
The device may only be installed and put into operation by qualified personnel. The corresponding
national regulations (e.g. VDE, DIN) must be observed.
Notes for Ex:
The device is category 3 electrical apparatus. Please observe the instructions given here for instal-
lation. The device must be installed in a housing with IP54 protection in acc. with EN 60529. The
limits for mechanical or thermal loads described for the device must not be exceeded. Only devices
designed for operation in the hazardous areas of Zone 2 may be connected. Under no circumstances
may repairs be carried out by the user.
Only engage or connect conductors in the hazardous area when the device is deenergized!
Block diagram
MINI MCR-SL-I-I(-SP) / MINI MCR-SL-U-U(-SP)
5