BCP-5/15-3.3/15-D24-C Murata Power Solutions Inc, BCP-5/15-3.3/15-D24-C Datasheet - Page 14

• Manufacturer Part Number: BCP-5/15-3.3/15-D24-C
• Description: DC/DC Converter
• Manufacturer: Murata Power Solutions Inc
• Series: BCPr

Specifications of BCP-5/15-3.3/15-D24-C

• Dc / Dc Converter O/p Type: Fixed
• No. Of Outputs: 2
• Input Voltage: 18V To 36V
• Power Rating: 50W
• Output Voltage: 5V
• Output Current: 15A
• Output Voltage 2: 3.3V
• Output Current 2: 15A
• Supply Voltage: 24V
• Product: Isolated
• Output Power: 75 W
• Input Voltage Range: 18 V to 36 V
• Input Voltage (nominal): 24 V
• Number Of Outputs: 2
• Output Voltage (channel 1): 5 V
• Output Current (channel 1): 15 A
• Output Voltage (channel 2): 3.3 V
• Output Current (channel 2): 15 A
• Isolation Voltage: 1.5 KV
• Package / Case Size: Half Brick
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

Murata Power Solutions, Inc.
11 Cabot Boulevard, Mansfi eld, MA 02048-1151 U.S.A.
ISO 9001 and 14001 REGISTERED
Options and Adaptations
Optional Functions
The BCP 75W DC/DC Dual Half-Bricks offer various electrical and mechani-
cal options. Per the Ordering Guide on page 2, the trailing input voltage range
(D24 or D48) in each part number pertains to the base part number. Part-
number suffi xes are added after the "input range," indicating the selection of
standard options. The resulting part number is a "standard product" and is
available to any customer desiring that particular combination of options, as
described below.
Suffi x
Blank
N
L1
L2
-Y
-H
-T
-C
Description
On/Off Control function with positive polarity on pin 3 and independ-
ent trim function on either output (5V trim on pin 5 and 3.3V trim on
pin 8). The pin length remains at 0.2 inches (5.08 mm).
On/Off Control function with negative polarity on pin 3.
Trim the pin length to 0.110 ±0.010 inches (2.79 ±0.25mm). This
option requires a 100-piece minimum order quantity.
Trim the pin length to 0.145 ±0.010 inches (3.68 ±0.25mm). This
option requires a 100-piece minimum order quantity.
RoHS-5 hazardous substance compliance with lead exception
Conformal Coating (special order):
Blank = no coating, standard
H = coating added, special order
Special trim versions (quantity order only)
RoHS-6 hazardous substance full compliance, no lead.
www.murata-ps.com/locations
06/02/08
Adaptations
There are various additional confi gurations available on BCP 75W DC/DC Dual
Half-Bricks. Because designating each with a standard part-number suffi x is not
always feasable, MPS assigns a 5-digit "adaptation code" after the part-number
suffi xes. Once a confi guration has been requested by a customer and created
by MPS, the resulting product is available to any customer as a "standard"
off-the-shelf product. Contact MPS directly if you are interested in your own
set of options/adaptations. Our policy for minimum order quantities may apply.
Consequently, the following products are offered for sale:
BCP-5/15-3.3/15-D48-30752
BCP-5/15-3.3/15-D48-30752-Y (RoHS-5)
logic and modifi ed V
with Power-One's HBD-series. Adapted low profi le packaging of 0.5 inches
(12.7 mm) and with trimmed pin length to 0.15 inches (3.8 mm).
in the RoHS specifi cation with the excepion of lead. MPS' RoHS-5 products use
all the conforming RoHS materials, however our solders are reduced lead.
BCP-5/15-3.3/15-D48-T special trim version (quantity order only).
BCP-5/15-3.3/15-D48THL2-Y
length and RoHS-5 hazardous substance compliance (with lead).
Standard product, 48V
RoHS-5 compliance refers to the exclusion of the six hazardous substances
Positive On/Off polarity, special trim, conformal coating added, 3.68mm pin
Murata Power Solutions, Inc. makes no representation that the use of its products in the circuits described herein, or the use of other
technical information contained herein, will not infringe upon existing or future patent rights. The descriptions contained herein do not imply
the granting of licenses to make, use, or sell equipment constructed in accordance therewith. Specifi cations are subject to change without
notice.
Dual Output, Mixed Voltage, Isolated 5V & 3.3 V,
OUT
Trim functions (pin 5 and 8 positions) to be compatible
IN
, 5V/15A and 3.3V/15A Outputs with positive On/Off
"Half-Brick" 75 W DC/DC Converters
12 Nov 2009 MDC_BCP_75W.B03 Page 14 of 14
BCP Models
email: [e-mail]
© 2009 Murata Power Solutions, Inc.