RELAY CARD-INT SOLA HEVI DUTY, RELAY CARD-INT Datasheet - Page 7

• Manufacturer Part Number: RELAY CARD-INT
• Description: Intellislot Relay Card
• Manufacturer: SOLA HEVI DUTY

Specifications of RELAY CARD-INT

• Features: Provides Dry Contact Relay Outputs For Custom Wired Applications And Delivers Support For Built-in Shutdown For AS/400 Systems
• Accessory Type: Relay Card
• For Use With: S4K5U
• Lead Free Status / RoHS Status: na

I
MPORTANT
SAVE THESE INSTRUCTIONS
This Manual Contains Important Safety Instructions. Read all safety and operating instructions
before operating the Uninterruptible Power Supply (UPS). Adhere to all warnings on the unit and in
this manual. Follow all operating and user instructions. This equipment can be operated by individu-
als without previous training.
This product is designed for Commercial/Industrial use only. It is not intended for use with life sup-
port and other designated “critical” devices. Maximum load must not exceed that shown on the UPS
rating label. The UPS is designed for data processing equipment. If uncertain, consult your dealer.
See Limited Warranty.
This UPS is designed for use on a properly earthed (grounded), 220-240 VAC (L-N), 50Hz or 60Hz
supply, for installation by qualified personnel. A qualified electrician must review and approve cus-
tomer supplied wiring, circuit breakers, intended loads, and verify correct input, output and earth
connections to ensure compliance with technical standards and local electrical codes of practice.
Installation instructions and warning notices only for use by qualified personnel are located after the
UPS operator instructions in this manual.
ELECTROMAGNETIC COMPATIBILITY—This UPS complies with the requirements of the EMC
Directive 89/336/EEC and the published technical standards. Continued compliance requires installa-
tion in accordance with these instructions and the use of manufacturer approved accessories only.
Operate the UPS in an indoor environment only in an ambient temperature range of 0-40°C
(32-104°F). Install it in a clean environment, free from moisture, flammable liquids, gases and corro-
sive substances.
This UPS contains no user serviceable parts. The UPS ON/OFF push buttons do not electrically iso-
late internal parts. Under no circumstances attempt to gain access internally, due to the risk of elec-
tric shock or burn.
Do not continue to use the UPS if the front panel indications are not in accordance with these operat-
ing instructions, or the UPS performance alters in use. Refer all faults to your dealer.
Only trained engineers authorized by Sola/Hevi-Duty should perform troubleshooting. To replace bat-
teries, refer all servicing to qualified service personnel. Proper disposal of batteries is required. Refer
to your local laws and regulations for disposal requirements.
Never block or insert any object into the ventilation holes or other openings.
DO NOT CONNECT equipment that could overload the UPS or demand DC current from the UPS,
for example: electric drills, vacuum cleaners, laser printers, hairdryers or any appliance using half
wave rectification.
Storing magnetic media on top of the UPS may result in data loss or corruption.
Turn the off UPS and isolate the UPS before cleaning. Use only a soft cloth, never liquid or aerosol
cleaners.
!
!
S
WARNING
This UPS should not be supplied from electrical power systems of the “IT” (Impédance à
Terre) type. (IEC 364-ELECTRICAL INSTALLATION OF BUILDINGS)
WARNING
This is a product for restricted sales distribution to informed partners. Installation
restrictions or additional measures may be needed to prevent radio interference.
AFETY
I
NSTRUCTIONS
1