07-AP892 ABLE SYSTEMS, 07-AP892 Datasheet - Page 7

• Manufacturer Part Number: 07-AP892
• Description: PRINTER, IMPACT PORTABLE
• Manufacturer: ABLE SYSTEMS

Specifications of 07-AP892

• Interface: Serial RS-232
• Print Speed: 1.7 Lines/sec
• Svhc: No SVHC (18-Jun-2010)
• External Depth: 158mm
• External Length / Height: 104mm
• External Width: 82mm
• Weight: 640g
• Interface Type: Serial RS-232
• Rohs Compliant: Yes
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

CAUTION: Take care not to damage the exposed metal contacts within the printer while changing the
the power pack. Do not touch these metal contacts, or the gold contacts on the power pack, as this
may impair operation.
4.3
any metallic object. For example, the battery pack should never be carried loose in a pocket where it
could rub against coins, keys or other metallic objects.
Short-circuiting the contacts of the battery pack will cause a heavy current to flow, which may lead to
excessive heating of the battery pack or any metallic objects connected to it. This could cause burns,
or start a fire.
CAUTION: It is strongly recommended that the external charger is disconnected whenever the battery
pack is removed or replaced.
4.4
Please observe local standards for the handling, transport and disposal of Nickel-Cadmium Cells.
Regulations prohibit the disposal of Nickel-Cadmium Cells in certain countries. Complete battery
packs may be returned, at the user's risk and expense, to Able Systems for ecological recycling.
Consult the factory for details.
4.5
Two types of battery pack are currently available for use with the Ap890. These are:
The standard Ap890 is normally supplied with a single NiCd battery pack.
The capacity of a fully charged NiCd pack will normally be sufficient to print normal text along about
two full rolls of paper. However, the amount of printing which can be achieved depends greatly on the
printing density, idle time and other factors such as the ambient temperature and the history of the
battery pack. The NiMH pack capacity may be found to be greater in some applications, but the
lifetime will normally be shorter.
With the printer awake but idle, a fully charged battery would last for up to 10 hours, but the built-in
sleep mode shuts down the printer completely, reducing energy consumption to a negligible rate.
In the event of the battery becoming exhausted, the printer will automatically protect its own control
circuitry by entering sleep mode if the instantaneous battery voltage drops below a threshold (e.g.
during a particularly heavy section of print). In this case data stored in the buffer is lost.
4.6
The battery pack can be recharged while installed in the Ap890. A flat battery can normally be
completely recharged in about 15 hours at the normal rate. See section ‘7.3 Battery Charger Details’.
If it is not convenient to recharge the pack within the printer, it may be exchanged for a fully-charged
pack (see section ‘4.2 Removing And Replacing The Power Pack’). The discharged pack can then be
recharged in the printer at another time. A separate charging unit will be available, so that multiple
packs can be recharged while the printer remains in use.
BATTERY PACK HANDLING PRECAUTIONS
BATTERY PACK ENVIRONMENTAL CONCERNS
BATTERY PACK TYPES AND CAPACITY
BATTERY PACK RECHARGING
§
§
WARNING! Battery Handling Precautions
The battery contacts are recessed, and the pack is fitted with an internal safety fuse, but the
user must take care to avoid short-circuiting the contacts, by preventing them from touching
WARNING! Do Not Try To Open The Battery Pack
The standard battery pack contains five Nickel-Cadmium Cells. Cadmium is a potentially
toxic heavy metal, and exposing the cells increases the risk of leakage or short-circuiting.
950 mAH NiCd
1300 mAH NiMH
Ap890 and Ap892 User Guide Page 7 of 12
(ASL Product Code AP800BP-01)
(ASL Product Code AP800-MHBP)
Section Continues…