11-71315-225-01 3M, 11-71315-225-01 Datasheet - Page 21

• Manufacturer Part Number: 11-71315-225-01
• Description: CT 150 USB CONNECTION WITHOUT BEZEL, POWER SUPPLY INCLUDED
• Manufacturer: 3M
• Series: C1500SSr
• Type: Capacitiver

Specifications of 11-71315-225-01

• Length: 12" (304.1mm)
• Width: 14" (350.4mm)
• Height: 9" (228.1mm)
• Interface: USB
• Diagonal Screen Size: 15" (380mm)
• Lead Free Status / Rohs Status: Details

3M™ MicroTouch™ Display C1500SS Installation Guide
Maintaining Your Touch Display
Touch Sensor Care and Cleaning
CHAPTER 5
Maintenance and Troubleshooting
If you have a problem setting up or using your display, you may be able to solve it
yourself. Before calling 3M Touch Systems, try the suggested actions that are appropriate
to the problems you are experiencing with the display. You may also want to consult
your video card user’s manual for additional troubleshooting advice.
To maintain your display and keep your display operating at peak performance:
• Keep your display and sensor clean
• Adjust the display video controls. Refer to Chapter 4 for more information.
• Do not install the display in a place where ventilation may be hindered. Always
The touch sensor requires very little maintenance. 3M Touch Systems recommends that
you periodically clean the glass touch sensor surface.
Typically, an isopropyl alcohol and water solution ratio of 50:50 is the best cleaning
agent for your touch sensor. You can also use straight isopropyl alcohol. In addition, 3M
Touch Screen Cleaner CL680 has been tested and approved for this use. Be sure to follow
solvent manufacturer's precautions and directions for use when using any solvents.
• It is important to avoid using any caustic chemicals on the touch sensor. Do not use
• Always dampen the cloth and then clean the sensor. Be sure to spray the cleaning
• Apply the cleaner with a soft, lint-free cloth. Avoid using gritty cloths.
• Always handle the touch sensor with care. Do not pull on or stress flex tail.
maintain adequate ventilation to protect the display from overheating and to ensure
reliable and continued operation.
any vinegar-based solutions.
liquid onto the cloth, not the sensor, so that drips do not seep inside the display or
stain the bezel.
3M Touch Systems Proprietary Information
21