AFCT-57V6NSZ Avago Technologies US Inc., AFCT-57V6NSZ Datasheet - Page 21

• Manufacturer Part Number: AFCT-57V6NSZ
• Description: 1.25GBd ZX SFP 40km LC -10/85
• Manufacturer: Avago Technologies US Inc.

Specifications of AFCT-57V6NSZ

• Data Rate: 1.25Gbd
• Wavelength: 1550nm
• Applications: Ethernet
• Voltage - Supply: 3.135 V ~ 3.465 V
• Connector Type: LC Duplex
• Mounting Type: SFP
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

Connectors and Cables
The optical interface of the AFCT-57V6NSZ is a duplex LC
connector which is described in TIA/EIA FOCIS document
[5]. PC-polished ferrules are recommended in mating
cables for the AFCT-57V6NSZ.
The electrical connection is provided by a card edge
connector which mates with a corresponding socket [1].
In addition the transceiver fits a cage assembly [1] which
also functions as an EMI shield. Contact an Avago sales
office for cable, electrical connector, cage and accessory
ordering information.
Physical Description
Figure 14 shows the mechanical outline of the Avago
AFCT-57V6NSZ SFP. For a complete description of the
footprint standards, refer to the MSA specification [1].
Figure 14. AFCT-57V6NSZ Mechanical Outline Drawing
21
[0.246±0.002]
6,25±0.05
TX
RX
14,46
[0.569]
AREA FOR DUST CAP
+0,1-0
[0.551±0.004
14±0.1
[0.539±0.004]
13,7±0.1
[0.500±0.004]
12.7±0.1
[0.058]
1,48
[0.610]
15.5
Laser Eye Safety
The Avago Technologies AFCT-57V6NSZ module is a Class
1 laser product under the requirements of IEC 60825-
1:1993+A1:1997+A2:2001 and U. S. 21 CFR 1040.10 and
1040.11 except for deviations pursuant to Laser Notice
No. 50, dated July 26, 2001, when used as specified by
Avago. Class 1 products are considered to be safe.
Caution -Use of controls or adjustment or performance
of procedures other than those specified herein may
result in hazardous radiation exposure. Any modifica-
tion, adjustment, or use of the AFCT-57V6NSZ module
not specified by Avago may void the certification of the
product and constitute an act of new manufacturing of
a laser product under 21 CFR Subchapter J, and as such
will require recertification by the new manufacturer. This
includes operation beyond the Absolute Maximum Rat-
ings listed in Table 2.
[2.158±0.008]
55,5±0.20
Notes:
1. Bail delatch is colored BLUE for
SONET/Single-Mode Identification.
AVAGO
21CFR(J) CLASS1
[0.333±0.004]
8.45±0.1
AFCT-5745xxxZ
####nmLASER PROD
COUNTRY OF ORIGIN YYWW
S/N:########
[0.516±0.04]
13,2±0.1