SLCASA-CVR SOLA HEVI DUTY, SLCASA-CVR Datasheet

no-image

SLCASA-CVR

Manufacturer Part Number
SLCASA-CVR
Description
Power Supply Safety Cover
Manufacturer
SOLA HEVI DUTY
Type
Coversr
Datasheets

Specifications of SLCASA-CVR

Accessory Type
Safety Cover
Product
Linear
Commercial/medical
Commercial
Mounting Style
Panel
Open Frame/enclosed
Open Frame
Dimensions
5.62 in. L x 4.87 in. W x 2.50 in. H
Tight Regulation
0.10% Line and Load Combined
Input Voltage
100/120/220/230/240 AC Selectable
Input Frequency
47-63 Hz
Operating Temperature
0° to +50°C
For Use With
Sola Hevi-Duty SLS Series Linear Power Supply Case Style A
Lead Free Status / RoHS Status
Lead free / RoHS Compliant
Power Supplies Affected
SLS-05-030-1T, SLS-12-017T, SLS-24-012T
What’s Included
• Part A Cover
• Two Plastic Screws M3x6 mm
• Two Self-tapping Screws M3x6 mm
• Instruction Manual
Assembly Instructions for Cover Installation
1. Position the Part A Cover so that it overlaps the exterior surface of the
2. Line up the Part A Cover mounting holes with the Power Supply Chassis
3. Secure with the provided screws as shown in Figure 1.
Power Supply Chassis.
mounting holes. Be careful not to pinch the wires.
Self-tapping screws (2 qty)
M3x6 mm
Linear Power Cover Instruction Manual
Plastic screws (2 qty)
M3x6 mm
*Must use plastic only
*
*
FIGURE 1
Assembly Instructions for OVP
1. Locate the mounting holes as shown in Figure 2.
2. Attach SLO-12-000-TB tightly against the inner side of the cover.
3. Position the mounting holes and tighten the screws with 8 kg torque.
4. Assemble the two wires coming out of the SLO-12-000-TB. On the terminal
Notes
1. Be careful while assembling the cover, so that no parts on the PCB are
2. When tightening the screws, make sure the torque is 8 kg.
3. Derate power supply by 15% with cover installed.
Technical Support
U.S.: (800) 377-4384
International: (847) 268-6651
E-mail: tech@solahd.com
block, the white wire goes to the “+” and the black wire goes to the “-”.
damaged.
Model Number: SLCASA-CVR
FIGURE 2
Part Number: A272-108 Rev 3
September 22, 2008