81150A-001 AGILENT TECHNOLOGIES, 81150A-001 Datasheet - Page 15

• Manufacturer Part Number: 81150A-001
• Description: NOISE GENERATOR, ARB/FREQ/PULSE, 120MHZ
• Manufacturer: AGILENT TECHNOLOGIES

Specifications of 81150A-001

• Signal Generator Type: Pulse
• Bandwidth: 120MHz
• Modulation Type: Amplitude/Frequency/Phase/Pulse
• Supply Voltage Range: 100V To 240V
• External Height: 108mm
• External Width: 439mm
• Lead Free Status / RoHS Status: na

Modes of Operation
Coupling between channel 1 and 2
Trigger modes
There are four components to the mode of operation:
• Coupling between channels
• Trigger mode
• Waveform type
• Advanced modes
The two channel version has two distinct modes of operation:
• Coupling off: The two channels operate independently. Frequency generation for both
• Coupling on: The frequency, trigger mode, waveform type and advanced mode are
• Continuous: Continuous waveform, burst, sweep or modulation. The external in is not
• Externally triggered: Each active transition at the external in (rising, falling or both)
• Externally gated: The active level (high or low) at the external in enables waveforms,
• Internally triggered: The internal clock replaces the external trigger source. This can
• Manual: This generates a single trigger. The source is either a button on the front
Trigger rate
channels is based on the same clock reference, but can be selected independently.
identical for both channels. The fix delay of channel 1 and channel 2 is the same.
used in continuous mode.
generates a single waveform, burst or sweep.
bursts or sweeps. The last waveform, burst or sweep is always completed.
be applied for waveform, burst, or sweep.
panel or a remote command.
81150A: 1 µHz to 120 MHz (external or internal)
81160A: 1 µHz to 330 MHz (external or internal)
15