81150A-001 AGILENT TECHNOLOGIES, 81150A-001 Datasheet - Page 26

• Manufacturer Part Number: 81150A-001
• Description: NOISE GENERATOR, ARB/FREQ/PULSE, 120MHZ
• Manufacturer: AGILENT TECHNOLOGIES

Specifications of 81150A-001

• Signal Generator Type: Pulse
• Bandwidth: 120MHz
• Modulation Type: Amplitude/Frequency/Phase/Pulse
• Supply Voltage Range: 100V To 240V
• External Height: 108mm
• External Width: 439mm
• Lead Free Status / RoHS Status: na

Digital Channel Addition
If the instrument is equipped with two output channels, channel 2 can be added to
channel 1 internally. The maximum output voltage of channel 1 remains unchanged. If
channel addition is selected, channel 2 outputs the unchanged waveform of channel 2.
Timing characteristics
External in timing characteristics
1) Not available, if sweep or modulation is selected
2) Trigger period ≥ variable delay
3) External in amplitude > 500 mV. External in transition time < 10 ns. Valid for externally triggered pulse,
Delay: External in to main out 1, 2
Fix delay
Advance mode: off, burst
Advanced mode: sweep
Pattern mode: on
Variable delay
Delay
Fix delay
Advanced mode: off, burst
Advanced mode: sweep
Pattern mode: On
Jitter
External in to main out 1, 2
External in to trigger out 1, 2
External in to strobe out 1, 2
External in to sync out A, B
square, sine, ramp, arb. externally triggered noise or externally triggered sweep has peak-peak jitter of 8 ns,
measured with 50 Ω source impedance at main output.
Range
Resolution
Accuracy
(3)
(1)
26
81150A
366 ns typ.
350 ns typ.
406 ns typ.
Independent for out 1, out 2
0 s to 1000 s
1 ps, 6 digits
± 25 ps ± 50 ppm
External in to trigger out 1, 2
366 ns typ.
350 ns typ.
406 ns typ.
15 ps RMS typ.
15 ps RMS typ.
15 ps RMS typ.
(2)
81160A
366 ns typ.
350 ns typ.
406 ns typ.
Independent for out 1, out 2
0 s to 1000 s
1 ps, 6 digits
± 25 ps ± 50 ppm
External in to sync out A, B
366 ns typ.
350 ns typ.
406 ns typ.
15 ps RMS typ.
15 ps RMS typ.
(2)