81150A-002 AGILENT TECHNOLOGIES, 81150A-002 Datasheet - Page 24

• Manufacturer Part Number: 81150A-002
• Description: NOISE GENERATOR, ARB/FREQ/PULSE, 120MHZ
• Manufacturer: AGILENT TECHNOLOGIES

Specifications of 81150A-002

• Signal Generator Type: Pulse
• Bandwidth: 120MHz
• Modulation Type: Amplitude/Frequency/Phase/Pulse
• Supply Voltage Range: 100V To 240V
• External Height: 108mm
• External Width: 439mm
• Lead Free Status / RoHS Status: na

81160A trigger and strobe
outputs Sync Out A and
Sync Out B
For the one channel instrument as well as the two channel instrument two high speed
outputs sync out A and sync out B are provided at the front panel. The sync outputs
signals can be confi gured very fl exible by an internal switch matrix to output the logical
trigger out functionality or strobe out functionality according to the following switch
matrix.
1 channel instrument
1) It is e.g. possible, that the logical trigger signal 1 functionality is routed simultaneously to Sync A and Sync B.
2 channel instrument
1) It is e.g. possible, that the logical trigger signal 1 functionality is routed simultaneously to Sync A and Sync B.
Sync out A/Sync out B
The logical trigger output and logical strobe output functionality is described below.
Logical trigger signal
The logical trigger signal is an internally generated signal that can be routed to the BNC
connector of Sync out A or Sync out B. For the two channel instrument, the logical trigger
signal is generated for both, channel 1 and channel 2.
In advanced mode internally/externally modulated (AM, FM, PM, PWM), the logical trig-
ger signal has the frequency of the unmodulated carrier waveform with 50% duty cycle.
For FSK modulation the logical trigger signal generates the same frequency as the data
output – it alternates between the two frequencies.
If noise is selected the logical trigger signal is constant Low.
For all other modes of operation the logical trigger signal marks the start of each
waveform period.
Sync out A source
Sync out B source
Sync out A source
Sync out B source
Digital output level
TTL
ECL
Analog output level (modulator)
Impedance
Transition time
Connector
24
81160A
None, logical trigger signal 1, logical strobe signal 1
None, logical trigger signal 1, logical strobe signal 1
81160A
None, logical trigger signal 1, logical strobe signal 1,
logical trigger signal 2, logical strobe signal 2
None, logical trigger signal 1, logical strobe signal 1,
logical trigger signal 2, logical strobe signal 2
81160A
Selectable TTL, ECL
0 V/2.5 V nom.
-0.85 V/-1.80 V nom.
-2.0 V to 2.0 V (full scale),
Available, if routed to logical strobe out
50 Ω nom.
0.8 ns typ. (20%/80%)
BNC, front panel