SSB-2 QUAM NICHOLS, SSB-2 Datasheet - Page 4

• Manufacturer Part Number: SSB-2
• Description: Mounting Bracket
• Manufacturer: QUAM NICHOLS

Specifications of SSB-2

• For Use With: SSB Series Loudspeakers
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

SSB-3 Loudspeaker Assembly Support (Tile Bridge) for Ceiling Tile Installations
For all QUAM 8” Loudspeakers and others.
INTENDED USE:
Indoor environment, mounted parallel to floor plane
in a 24” wide suspended ceiling tile grid.
Used with compatible round and square baffles with stud or
screw mount; also suitable for torsion QUAM mount
loudspeakers.
Select your installation option from the list below:
1. BACKBOX and
2. ROUND Baffle Installation
3. SQUARE Baffle Installation
TORSION SPRING
MOUNTING SLOTS
© 2011 Quam-Nichols Company Quam-Nichols reserves the right to make changes and/or improvements to its products at any time and without notice.
- Cut 8-1/2” square hole in tile using tile bridge as
- Position tile bridge on TOP of tile, legs like:
- Install speaker /baffle on opposite of ceiling tile
- Cut 8-1/2” square hole in tile using tile bridge as
- Position tile bridge on TOP of tile, legs like:
- Install speaker /baffle on opposite of ceiling tile and
Installation of a Torsion Mount Assembly:
-Insert one spring leg into each rectangular opening
tile.
of tile bridge. Press speaker baffle to front of ceiling
CEILING TILE
Bend 4x locator tabs around tile in opening
Bend 4x locator tabs around tile in opening
- Refer to back box instructions for details.
Complete Tile preparation and Baffle installation
with either instructions #2 or #3
and fasten to tile bridge/tile assembly with 4x #8-32
screws provided with speaker/baffle assembly.
a template, with accessory cuts as shown in
RIGHT-HAND diagram below to access formed
threads.
fasten to tile bridge/tile assembly with 4x #8-32
screws provided with speaker/baffle assembly.
a template, see LEFT HAND diagram below.
CENTER
o
ROUND or SQUARE
without
I N S T A L L A T I O N
without
234 East Marquette Road, Chicago, IL 60637
Phone: (800) NEED NOW
E-Mail: [e-mail]
Baffle Installation
back can:
(800) 633 - 3669
back can:
V
V
o
MARK
TABS (4)
AND
CUT
:
Tie-off
point
Fax: (888) NEED NOW
2x
TORSION SPRING
MOUNTING SLOTS
(4)
I N S T R U C T I O N S
CEILING TILE
- Refer to loudspeaker assembly for proper termination,
- Insulate all unused taps from each other, the enclosure
NOTE! AHJ/ local codes may require tie-off to structure.
Tie-off to tile bridge frame using hole provided; see arrow
on diagram.
NOTE! AHJ/ local codes may require tie-down to grid
Create a hole in the T-bar next to the end of the tile bridge
rails; secure with wire through the hole in the end of the
(888) 633 - 3669
www.quamspeakers.com
CENTER
or go to
and electrical ground.
www.QuamSpeakers.com / Resources/ Wiring
o
11-3.24
o
MARK
AND
CUT
TABS (4)
6 7 3 2