50664 EMIT, 50664 Datasheet - Page 5
![Air Ionizer](/photos/24/3/240364/4121703_sml.jpg)
50664
Manufacturer Part Number
50664
Description
Air Ionizer
Manufacturer
EMIT
Datasheet
1.50664.pdf
(8 pages)
Specifications of 50664
Ionizer Type
Overhead
Flow Rate Max
100CFM
Depth
3.5"
Width
6.5"
Height
42"
Supply Voltage Vac
115V
Peak Reflow Compatible (260 C)
No
Flow Rate
100CFM
External Width
6.50"
Supply Voltage
110V
External Depth
3.50"
External Height
42.00"
Leaded Process Compatible
No
Rohs Compliant
No
Lead Free Status / RoHS Status
Contains lead / RoHS non-compliant
2 5 4 A
O F F r
Alarm Conditions
unit can detect low and high line voltages, and inoperable high voltage power modules. The
unit will sound a continuous audible alarm during all alarm conditions.
A C
S H d 1
Maintenance / Cleaning Procedure
by qualified personnel only. To reduce the risk of electric shock, do not perform any servicing
of internal parts unless you are qualified to do so.
TB-6534 Page 5 of 8
The ionizer is able to detect various problems that may occur through normal use. The
WARNING – RISK OF ELECTRIC SHOCK – These servicing instructions are for use
L
menu.
The first digit of the address will be flashing. Press
the first digit (0 to 2). Press the
After pressing the
display will show “OFF r” for remote off (default setting). This means that the unit
will not respond to the remote control. To enable the remote, press the
buttons until the display reads “On r” for remote on.
If the unit detects that the AC line voltage is too low, it will display “AC L” and
sound the alarm. If the unit detects that the line voltage is too high, it will
display “AC H” and sound the alarm.
If the unit detects that there is something wrong with the high voltage modules, or
the sensor circuitry, it will shutdown the high voltage modules of the fan for which
it detected the problem. If this occurs for fan #1 the unit will display
“SHd 1” and sound the alarm.
button to get to the enable or disable remote menu the
button to go to the enable or disable remote
or
buttons to change
Revision July 2008
© 2008 DESCO INDUSTRIES INC.
Employee Owned
or