EVAL-AD7985EBZ Analog Devices Inc, EVAL-AD7985EBZ Datasheet - Page 8

• Manufacturer Part Number: EVAL-AD7985EBZ
• Description: 16-Bit A/D Converter Eval. Board
• Manufacturer: Analog Devices Inc
• Series: PulSAR®r

Specifications of EVAL-AD7985EBZ

• Silicon Manufacturer: Analog Devices
• Application Sub Type: ADC
• Kit Application Type: Data Converter
• Silicon Core Number: AD7985
• Kit Contents: Board
• Number Of Adc's: 1
• Number Of Bits: 16
• Sampling Rate (per Second): 2.5M
• Data Interface: SPI™, QSPI™, MICROWIRE™, and DSP
• Inputs Per Adc: 1 Differential
• Input Range: 0 ~ 5 V
• Power (typ) @ Conditions: 15.5mW @ 2.5MSPS
• Voltage Supply Source: Analog and Digital
• Operating Temperature: -40°C ~ 85°C
• Utilized Ic / Part: AD7985
• Development Tool Type: Hardware - Eval/Demo Board
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

AD7985
Pin No.
19
20
21
1
AI = analog input, AI/O = bidirectional analog, DI = digital input, DO = digital output, and P = power.
Mnemonic
BVDD
REFIN
Exposed Pad
Type
P
AI/O
EP
1
Description
Reference Buffer Power. Nominally at 5.0 V. If an external reference buffer is used to achieve the maximum
SNR performance with a 5 V reference, the reference buffer must be powered down by connecting the
REFIN pin to ground. The external reference buffer must be connected to the BVDD pin.
Internal Reference Output/Reference Buffer Input.
When PDREF is low, the internal band gap reference produces a 1.2 V (typical) voltage on this pin,
which needs external decoupling (0.1 µF typical).
When PDREF is high, use an external reference to provide 1.2 V (typical) to this pin.
When PDREF is high and REFIN is low, the on-chip reference buffer and the band gap reference are
powered down. An external reference must be connected to REF and BVDD.
The exposed pad is not connected internally. For increased reliability of the solder joints, it is
recommended that the pad be soldered to the system ground plane.
Rev. A | Page 8 of 28