BMP085-0330SBO008 BOSCH, BMP085-0330SBO008 Datasheet - Page 23

• Manufacturer Part Number: BMP085-0330SBO008
• Description: Daughter Board
• Manufacturer: BOSCH

Specifications of BMP085-0330SBO008

• Silicon Manufacturer: Bosch
• Application Sub Type: Accelerometer - Three-Axis
• Kit Application Type: Sensing - Motion / Vibration / Shock
• Silicon Core Number: BMP085
• Kit Contents: Board

5.8 Mounting and assembly recommendations
Please read the following recommendations carefully:
Rev. 1.0
© Bosch Sensortec GmbH reserves all rights even in the event of industrial property rights. We reserve all rights of disposal such
as copying and passing on to third parties. BOSCH and the symbol are registered trademarks of Robert Bosch GmbH, Germany.
Specifications are subject to change without notice.
•
•
•
•
•
•
The clearance above the metal lid shall be 0.1mm at minimum.
For the device housing appropriate venting needs to be provided in case the ambient
pressure shall be measured. If waterproof packaging is needed, venting can be
accomplished by a vent element with a membrane like Gore-Tex
Liquids shall not come into direct contact with the device.
The sensor is sensitive to light, which can influence the accuracy of the measurement.
Therefore, the hole in the top lid shall not be exposed to direct light during operation.
The BMP085 shall not the placed close the fast heating parts. In case of gradients
> 3°C/sec. it is recommended to follow Bosch Sensortec application note ANP015,
"Correction of errors induced by fast temperature changes". Please contact your Bosch
Sensortec representative for details.
For further details, please refer to the BMP085 handling, soldering & mounting
instructions manual that is also available from Bosch Sensortec.
Data sheet
Page 23
BMP085
(TM)
.
Bosch Sensortec
01 July 2008